dentalfarm H8, User And Maintenance Manual

Page: 3 / 14

1. INTRODUCTION AND GENERAL INFORMATION
1.1 OBJECTIVE OF THE MANUAL
This instruction manual is addressed to qualified personnel who must have knowledge of the health and safety
rules of the place of installation. The objective of this manual is to give useful information and warnings, both to
the installer and the user, regarding:
HOW TO STORAGE AND KEEP THE EQUIPMENT BEFORE USE:
• Place and room conditions
• Expiry date
FOR THE INSTALLER
• Precautions for hygienic safety
• Equipment description and features
• Place and mode of installation
• Activation
• Procedures to follow after a period of inactivity of the equipment
• Equipment disposal
• Solutions to some problems
FOR THE USER
• Instructions for the periodic rinsing of the resins
• Instructions for the care and cleaning of the equipment
• Health and hygiene warnings concerning the water produced by the equipment.
The manual also gives you the guidelines to avoid ayn improper use of the equipment and it specifies the installer
and the user’s responsibilities, therefore we suggest to read through this manual before installing or using the
water softener. If the instructions are not followed, the manufacturer will decline responsibility for any damage
caused to people, things or animals and will consider the guarantee null and void.
1.2 KEEPING THE MANUAL
This manual is an integral part of the product. It must be kept with care by the user and it must accompany the
equipment, even in case of a property transfer.
1.3 EQUIPMENT IDENTIFICATION
The equipment is identified by the numbers written in bold on the bottom left side of the label (pic. 2, I) on the
softener’s tank, on the package and on the back of this manual.
1.4 DECLARATION OF COMPLIANCE
This product complies with the Community Regulations and national laws applicable at the moment of its
entrance on the market. The declaration of compliance signed by the manufacturer is available on request and
online.
1.5 HYGIENIC SAFETY NORMS AND TIFQ TESTING
This equipment has been tested to verify its compliance with the hygienic safety regulations specified by the
Italian rules on the subject, the Legislative decree n. 31/2001, according to Ministerial decree 25/2012. It is
necessary to use original replacement parts for repairs and maintenance to guarantee hygienic safety. To
preserve hygienic safety, we recommend to remove the equipment from the package only at the moment of
installation. The equipment has been tested by the TiFQ Institute for the Hygienic Quality of Food Technology in
their licensed laboratory (see table, end of manual).