23
Read Data Scalar
– Retrieves the PowerScout’s
data scalar setting. For more information
about Data Scaling, see
Interpreting the
PowerScout Registers—Data Scaling
section of
this manual.
Set Data Scalar
– Sends the data scalar setting
to the PowerScout.
Read Demand Window Size
– Read the
demand window size setting on the
PowerScout.
Set Demand Window Size
– Set the demand
window size. The window can be between 1
and 60 minutes.
Clear Totals
– Clears accumulated data.
Sync Registers
– Locks all register readings for
a maximum of one hour. Data is still
continuously collected in the background.
The final section states the status of the
logger.
Refer to Appendix E for a list of modbus
registers and their descriptions.
Firmware
The
Firmware
screen verifies the current
firmware version and updates the PowerScout
3 internal firmware.
Element
- The PowerScout 3 is a single meter
and cannot be changed from Element A.
Firmware Update File
– The file containing the
new firmware version can be entered using
the box or located with the
Browse
button.
Meter Information
– To verify the current
firmware version of the PowerScout, click the
Show Version
button. The firmware version
information displays.
Update Progress
– Displays the installation
progress of the new firmware version.
Status
- Provides the status of the meter.
Cancel Update
button – Cancels a firmware
update while it is in progress.
Update
button – Starts the firmware update.
Summary of Contents for PowerScout 3
