PREPARATION OF REMOTE CONTROLLER
Load the batteries to the groove of the remote controller and then enable you to operate the native
1. Open the lid
2. Load the batteries (AAA type) and attend whether the anode and cathode of battery are corresponding
to the polarity indicated on the remote controller
3. Close the lid
OPERATION SCOPE OF THE REMOTE CONTROLLER
Make the controller toward the inductive window of native
and then press the keys
1. Distance: about seven meters in
front of the inductive window
2. Angle: about 30 degree right or left
refer to the frontispiece of the native’s front panel
INDUCTIVE WINDOW OF FRONT PANEL
USEFUL PROMPT
To prolong the useful life of this machine, the interval of the continuous switching action must be above one
minute
The parameter of the using power source should be accordance with which indicating on its rear panel,
otherwise the machine will work improperly and even be ruined. Use the attached adaptor for power supply
When the picture that the unexpected non-respondency happening, please turn on the machine again
To maintain the suitable antenna installation position, the proper antenna installation angle, adequate antenna
earthing, the normal antenna anti-interference measure; and should keep the earthing
of the outdoor antenna separating with the indoor equipment’s
6
