Denso RS 31 BHT-1600 User Manual Download Page 99

Page: 99 / 159

3.7. RESET TO FACTORY DEFAULT

Performing a factory reset will erase all data on your handy terminal (including call logs,

messages, files as well as your installed apps and their associated data) and revert the
device back to its original state in which it is powered on by you for the first time.

It is strongly recommended that you follow the instructions in

Back up Your Data

to back

up important data before performing a factory reset.

To start:

1)Tap

All Apps

Settings

Backup & reset

and

Factory data reset.

Confirm the action by tapping on the buttons and input the verification code. Finally, tap

to perform a factory reset.

Summary of Contents for RS 31 BHT-1600
































































































































































Search results

Summary of Contents for RS 31 BHT-1600

Reviews:

Related manuals for RS 31 BHT-1600

Brands by name

Popular brands

Denso RS 31 BHT-1600, User Manual

Search results

Summary of Contents for RS 31 BHT-1600

Reviews:

Related manuals for RS 31 BHT-1600

Brands by name

Popular brands