Denso RS 31 BHT-1600, User Manual

Page: 112 / 159

4.2.2. MANUALLY ADD WI-FI NETWORK
If the network you would like to connect to does not broadcast its SSID, or if the network
is out of range, you may add it manually.
1)
Tap All Apps | Settings | Wi-Fi .
2)
Tap the Wi-Fi switch to enable this function, and then tap More and select “ Add
network ”.
3)
In the dialog box, enter the name of the network in the Network name field, and
select a security method in the Security field (None, WEP, WPA/WPA2 PSK, 802.1x
EAP).
For WEP/WPA/WPA2 PSK connections: Enter the required password and tap
Save .
For 802.1x EAP connections: Tap Advanced options and select the EAP
method in the drop-down box (PEAP, TLS, TTLS, PWD, SIM, AKA), and the Phase 2
authentication in the drop-down box (None, MSCHAPV2, GTC). Select a CA
certificate and User certificate if required (certificates may be installed under
All Apps | Settings | Security | Install from SD card OR
All Apps | Settings | Wi-Fi | More | Advanced | Install
Certificates .) Enter your username in the Identity box and the password in the
Password box if required.
The handy terminal supports the following certificate file extensions:
4) If necessary, select the Proxy server and IPv4 settings. By default, no proxy is set
and IP settings are set to DHCP .
File Extension Type Standard certificate Key store
Description
DER-encoded X.509
certificates saved in
.crt or .cer files. X.509 certificates saved in
PKCS#12 key store files with
a .p12 or .pfx extension.
How to install
change the extension to
.crt or .cer. Change the extension to
.p12 or .pfx.