Denso PR-700UDM, Operator'S Manual

Page: 16 / 32

16
Chapter 2 Preparation
Operating Environment for PR-700UDM
PR-700UDM is a contactless IC card reader/writer that communicates with a contactless IC card
through a host computer. MIFARE, FeliCa, ISO/IEC 14443 TypeA, TypeB are supported. Using
the PR-700UDM requires a host computer with a USB Port.
A USB-COM interface is required to connect the PR-700UDM with a host computer. To use this
interface, you need to install the dedicated Active USB-COM driver (virtual COM port driver) to a
host computer. This interface allows you to use the device in applications using the conventional
serial port.
Interface
USB-COM
Host computer DOS/V with a USB port conforming to USB1.1
Operating System
（ OS ）
Windows XP (32bit)
Windows Vista (32bit)
Windows 7 (32bit/64bit)
Windows 8
（
32bit/64bit
）
USB driver Active USB-COM port driver
provided by DENSO WAVE *
* It can be downloaded for free from our website at:
http://www.qbdirect.net