background image

32 

All rights reserved. No part of this publication may be reproduced in any form or by any means without
permission in writing from the publisher. All products and company names mentioned are trademarks or
registered trademarks of their respective holders.

DENSO WAVE INCORPORATED does not assume any product liability arising out of, or in connection with,
the application or use of any product, circuit, or application described herein.

If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the product
having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the
warranty period.

Intellectual Property Precaution
DENSO WAVE INCORPORAT

ED (“DENSO WAVE”) takes reasonable precautions to ensure its products

do not infringe upon any patent of other intellectual property rights of other(s), but DENSO WAVE cannot
be responsible for any patent or other intellectual property right infringement(s) or violation(s) which arise
from (i) the 

use of DENSO WAVEʼs product(s) in connection or in combination with other component(s),

product(s), data processing system(s) or equipment or software not supplied from DENSO WAVE; (ii) the
use of DENSO WAVEʼs products in a manner for which the same were not intended nor designed; or (iii)
any modification of 

DENSO WAVEʼs products by other(s) than DENSO WAVE.

弊社では、お客様の生命、身体や財産に被害を及ぼすことなく安全に使っていただくために、細心の注意
を払っております。当製品をご使用になる際には、本操作ガイドおよび取扱説明書にしたがってください。

落下・衝撃によると弊社が判断した不具合に対しては、保証期間内であっても有償修理となります。

弊社では、弊社製品が他の特許などを侵害しない為の適切な処置をとっていますが、以下の

(

1

)-(

3

)

のいず

れかを原因として生じた特許などの侵害については、責任を負いかねますのでご了承ください。

(1)

 

弊社以外から供給された部品、製品、装置、データ処理システムあるいはソフトウェアと組合わされて使
用された場合 

(2)

 

弊社製品が意図されない方法で使用された場合 

(3)

 

弊社以外によってなされた弊社製品の改変 

Copyright © DENSO WAVE INCORPORATED, 2018 
All rights reserved. No part of this publication may be reproduced in any form or by any means without 
permission in writing from the publisher. 
All products and company names mentioned in this document are trademarks or registered trademarks 
of their respective holders. 
QBdirect is a trademark of DENSO WAVE INCORPORATED. Microsoft Windows is a trademark of 
Microsoft Corporation. Other products and company names mentioned in this document are 
trademarks or registered trademarks of their respective holders. 
Specifications are subject to change without prior notice. 

この操作ガイドの著作権は、株式会社デンソーウェーブにあります。本書の一部または全部を無断で複製・転
載することはお断りします。 
QBdirectは(株)デンソーウェーブの登録商標です。Microsoft Windowsはマイクロソフト社の登録商標です。そ
の他の会社名や製品は、一般に各社の商標または登録商標です。 
本書の内容に関しては、仕様改良などにより予告無しに変更することがあります。 

〒470-2297  愛知県知多郡阿久比町大字草木字芳池1 

1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi 470-2297, Japan

 

https://www.denso-wave.com/ 

この印刷物は、再生紙を使用しています。 

This manual uses recycled paper.

   5.15 – 5.35 GHz shall be restricted to indoor operations.

Summary of Contents for BHT-1700BWB-1

































Reviews: