22
4
Troubleshooting
Symptom
Cause
Solution
WiRC does not start
up.
ESC (Electrical
Speed Controller) or
BAT channel not
connected.
Check ESC/BEC functions, and the
proper wiring as indicated on
diagrams at the Powering section.
WiRC is not detected
by the smartphone
application.
The smartphone is
not connected to the
same WiFi network
as the WiRC.
Check the WiFi settings menu in
the smartphone and connect to the
WiFi network according to WiRC
WiFi settings.
If you forgot the WiFi settings on
the WiRC, restore WiRC to factory
default settings, restart the
application and connect to the
WiRC with default settings.
WiFi network is not
created by the
WiRC.
WiRC WiFi is
configured to Client
mode.
In Client mode the WiRC requires
an existing WiFi network. If this
network does not exist or if you
have misconfigured the Client
mode settings restore WiRC to
factory default.
WiFi network is not
created by the
WiRC.
The USB WiFi stick
could not be
initialized.
Check if the USB dongle is
connected to the USB.
Try to restart the WiRC.
Connection lost to
WiRC.
The power dropped
of the excessive
overload.
Restart the WiRC.
In the long-term, the solution is to
use larger battery, or limit the Min
Max settings of the speed control.
Connection
established to WiRC,
but the connection is
not stable.
(WiRC operate in AP
The distance is too
long between WiRC
and smartphone, or
too many WiFi
networks use the
Reduce the distance between WiRC
and smartphone, or configure
WiRC to a different WiFi channel.
