10
Trim button:
When this button is pressed then trim values of the channels can
be adjusted with the vertical and horizontal sliders (normally
these sliders set the dual rate. Dual rate settings change both
minimum and maximum outputs on a given channel).
The trim settings can be also changed from the settings menu.
Mode switch button:
Four different modes can be configured in the settings menu. You
can assign the user inputs (joysticks etc.) to the channels and
digital outputs differently in different modes.
You can change the current mode by pressing the mode switch
button.
The number of the current mode is displayed below the button.
Camera switch button:
If there is more than one camera connected to the WiRC. You can
switch camera stream source by pressing the camera switch
button.
The ID of the currently selected camera is displayed on the right
side of the button.
2.4
Settings Menu
For configuration and settings you need to connect to WiRC, start
the application, and select “Settings” icon on the top left corner of
the screen.
