Wi-Drive Installation Manual
© Dension Audio Systems
15(26)
iv. Tap on this device and enter PIN (0000) code to pair it with your Phone.
v. Tap Connect. Status will change to Connected, and Internet tethering will
be active.
Internet connection will be active and available for the Wi-Fi devices connected through
Wi-Drive’s secure Access Point until your Phone is connected.
On Wi-Drive’s web interface you can manage the established connections.
3.4
OPTION2 C: 3G Phone connected via Bluetooth DUN setup
For configuring the 3G phone access via Bluetooth Dial Up Networking (DUN) please follow
these steps. Please check your Phones compatibility on www.dension.com/widrive.
Prerequisites are a Bluetooth USB Adapter (dongle) and a Bluetooth enabled 3G Phone
implementing the Bluetooth DUN profile.
Nokia E51 example is shown here, consult your Phone’s manual to perform these steps, and
also check
www.dension.com/widrive
for other Phone configuration examples.
1. Configure your 3G operator settings on Wi-Drive’s web interface, follow the steps
1-13 under 3.1.
2. Connect a Bluetooth USB modem (dongle) to one of the USB Extension ports on Wi-
Drive.
3. Configure and connect your Phone.
