Wi-Drive Installation Manual
© Dension Audio Systems
13(26)
3.2
OPTION2 A: 3G Phone connected with USB cable setup
For configuring the 3G phone access via USB cable (RNDIS) please follow these steps!
Please check your Phones compatibility on www.dension.com/widrive.
Usually phones with Windows Mobile support this operating mode. On Windows Mobile 6
follow these steps. Your phone has to be configured according to your 3G operator settings.
1. Power on Wi-Drive by starting the engine. The Wi-Drive “Status LED” should turn on
Orange for a few seconds (boot up), than blink green slowly – to indicate Access
Point (AP) mode.
2. Connect the phone to one of the USB Extension ports on Wi-Drive, by using the USB
cable provided with the phone.
3. On your Phone set the followings:
i. Set (checkbox) “Enable advanced network functionality” under Start /
Settings / Connections / USB to PC.
ii. Click on “Internet sharing” application under “Start”.
iii. Select USB for “PC Connection”, and select your configured 3G
connection for “Network Connection”.
iv. Click Connect.
Your Internet connection will be active and available for the Wi-Fi devices connected through
Wi-Drive’s secure Access Point. If you disconnect the Phone, Internet connection will not be
available to the connected devices. Next time you connect the Phone, just click on
Start/Internet sharing and Connect to re-establish the Internet connection.
3.3
OPTION2 B: 3G Phone connected via Bluetooth PAN setup
For configuring the 3G phone access via Bluetooth Personal Area Networking (PAN) please
follow these steps. Please check your Phones compatibility on www.dension.com/widrive.
Prerequisites are a Bluetooth USB Adapter (dongle) and a Bluetooth enabled 3G Phone
implementing the Bluetooth PAN profile.
Apple iPhone example is shown here, consult your Phone’s manual to perform these steps,
and also check
www.dension.com/widrive
for other Phone configuration examples.
1. Connect a Bluetooth USB modem (dongle) to one of the USB Extension ports on Wi-
Drive.
2. Configure and connect your Phone.
i. Enable 3G Network connection on your Phone.
Go to Settings/General/Enable 3G and turn it ON.
