Dension 500S, User Manual

Page: 13 / 17

24 25
► Service following: The device has service following support so the
currently played station might be available even after moving from
the area where the station was originally broadcasted on a different
frequency.
Settings menu
Here you can modify the basic Gateway settings in order to personalize it
for your needs and make it work properly with your car.
► Volumes: This menu allows you to set different volumes in the system:
► iPod, USB, AUX volumes for music playback
►
Languages: Here you can select between more than fifteen different
languages.
Please note: this setting will modify only the language of the menu
which is displayed by the Gateway.
► About: In this menu, you can check the current firmware version of the
Gateway and the connected accessories.
Please note: After changing settings you need to turn the Gateway off
completely in order to load the system with the new settings. For your
information: some settings (e. g. volume) don’t require restart.
11. OPERATION IN AUDI
FIRST STEPS
Switch on your car radio and push the CD button at the centre console.
To select the CD changer, choose ‘Changer’ in the upper left corner of the
screen.
Connect your iPod or USB storage to the Gateway. It will start playing
the first song on the device. In case the Gateway was in use earlier, the
music will continue playing from your iPod or USB from where it stopped
previously.
When switching off the radio the playback will stop and the source device
will go on standby.