Dension 500S, User Manual

Page: 4 / 17

6 7
6. SETTINGS MENU
Volume
The volumes menu allows you to set the outgoing volume level of the
Gateway for every source:
► USB, iPod, AUX volumes for music playback
Please note: You can change only the outgoing volume of the Gateway (if
it’s too low or distorted) through this menu. Changing the final volume (car
dependent) is possible only with the volume knob.
Language
This lets you change the language of the Gateway’s menu.
About
Provides information on the Gateway product (e.g. software and firmware
version, serial number, etc.).
7. OPERATION IN PORSCHE
First steps
Switch on your car radio and go to the menu’s media section by pressing
the ‘Audio’ button. To reach the CD changer option, you will need to press
the CD button after this.
Connect your iPod or USB storage to the Gateway. It will start playing the
first song on the device. In case the Gateway was in use earlier, the music will
continue playing from your iPod or USB from where it stopped previously.
When switching off the radio, the playback will stop and the source device
will go on standby.
Accessing the menu
The menu of the Gateway is displayed on the PCM head unit.
Entering the menu
To enter the menu of the Gateway, you need to go into the „CD List” menu
on the PCM unit and move the cursor to CD6 (called “Menu”) by rotating
the right side rotary knob, then select it by pressing the same knob.
To see the information of the currently played song, you need to select
the ‘Now Playing’ menu (CD1). The device jumps to ‘Now Playing’ mode
automatically after a certain time or if a song is selected in the menu.