14
Filter
•
Resonance
: This is the resonance of the filters on Channels 1–4 (i.e., how much the frequencies just
beyond the cutoff frequency are allowed to pass through the filter).
0
is a flat setting (frequencies just
beyond the cutoff frequency won’t be heard at all), while
15
yields a high resonance (the cutoff
frequency is not as “strict,” so some adjacent frequencies will be heard).
•
Extreme Type:
This setting determines the effect of the Sweep Filters at the extreme low and high
ends. Select
Kill
for the filter extremes to end in silence, or select
Bleed
to allow the extreme end of the
filter to play.
Headphone
•
Attenuation
: This is the gain level of the headphone output:
-10dB
to +1
0dB
.
•
Split Cue Output
: This sets which side of the stereo signal plays the
Cue
program on headphones,
Left
or
Right
.
Microphone
These settings affect the microphones.
•
Attenuation
: This is the gain level of the microphone inputs:
-15dB
to
+0dB
.
•
Gate Threshold:
This setting changes the amount of audio required to engage the mic signal.
Different types of microphones may require this to be adjusted for best use:
-40dB
to
-79dB
.
•
Talk Over Level
: This setting determines how much the master mix volume level is lowered when the
microphone talkover feature is activated:
-40dB
to
-20dB
.
•
Talk Over Resume
: While using the talkover feature, the master mix volume will return to its normal
level after the microphone input detects no incoming signal. This setting determines whether that
transition occurs moderately (
Normal
) or quickly (
Fast
).
•
EQ High
: This is the frequency band that will be affected by the High Mic EQ knob:
1,000Hz
–
10,000Hz
(in varying increments).
•
EQ Low
: This is the frequency band that will be affected by the Low Mic EQ knob:
100Hz
–
900Hz
(in
varying increments).
•
Booth Receive
: Select
On
to allow the microphone signal to be sent to the booth outputs and record
outputs. Select
Off
to send the microphone signal to the master outputs only.
•
Headphone Receive:
Select
On
to allow the microphone signal to be sent to the headphones. Select
Off
to send the microphone signal to the master outputs only.
•
Reset Mic Default
: Select
OK
to return the Mic settings to their default values, or select
Cancel
to
return to the previous menu.
FX
These settings affect the FX on X1850 PRIME.
•
FX Return
: This is the unity level for the send outputs and receive inputs:
-10dB
–
+10dB
. You may
need to adjust this setting based on the types of external effects you are using.
•
Beat Break Edit
: This menu enables you to select, edit, and store patterns for the BeatBreak effect.
for more information about how this effect works.
To edit a pattern
:
1.
Turn the
FX Select
/
Enter
knob to select a pattern (
1
–
16
), and then press it.
2.
Turn the
FX
Select
/
Enter
knob to select one of 12 16th-notes in the pattern. You cannot edit the four
main beats of the pattern; they will always sound because they contain the audio being sampled.
Press the
FX Select
/
Enter
knob to change the beat from a “hit”/“strike” (
█
) to a rest (
__
) or vice
versa.
Repeat this step, if desired.
3.
Press
Back
to return to the previous screen.
