Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
ENGLISH
e
Put the rear cover back on.
30°
30°
Approx. 7 m
NOTE
• Replace the batteries with new ones if the set does not operate even
when the remote control unit is operated close to the unit.
• The supplied batteries are only for verifying operation.
• When inserting the batteries, be sure to do so in the proper direction,
following the “
q
” and “
w
” marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• When replacing the batteries, have the new batteries ready and
insert them as quickly as passible.
Point the remote control unit at the remote sensor when operating it.
NOTE
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
Operating Range of the Remote Control
Unit
Inserting the Batteries
About the Remote Control Unit
Cautions on Loading Discs
Cautions on Handling
Cautions on Storing Discs
•
Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
•
Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
•
Do not use discs on which the sticky part of cellophane tape or labels
is exposed or on which there are traces of where labels have been
removed. Such discs can get caught inside the player and damage
it.
•
Do not get fingerprints, oil or dirt on discs.
•
Take special care not to scratch discs when removing them from
their cases.
•
Do not bend or heat discs.
•
Do not enlarge the hole at the center.
•
Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
•
Water droplets may form on discs if they are moved suddenly from a
cold place (outdoors for example) to a warm place, but do not try to
dry them off using a hairdryer, etc.
•
Be sure to remove discs after using them.
•
Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
•
Do not store discs in the following places:
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heating appliances, etc.
Cleaning Discs
•
If there are fingerprints or dirt on discs, wipe them off before using
the disc. Fingerprints and dirt can impair sound quality and cause
interruptions in playback.
•
Use a commercially available disc cleaning set or a soft cloth to clean
discs.
Gently wipe the disc from the
inside towards the outside.
Do not wipe with a circular
motion.
NOTE
Do not use record spray, antistatic agents, or benzene, thinner or other
solvents.
q
Slide the rear lid in the
direction of the arrow and
remove it.
w
Load the two batteries properly
as indicated by the marks in the
battery compartment.
Get
ting Star
ted
Summary of Contents for S-102
Page 49: ......
Page 50: ......
Page 51: ......
Page 52: ...Denon Brand Company D M Holdings Inc Printed in China 00D 511 4645 000 www denon com ...