Denon S-102, Owner'S Manual

Page: 31 / 52

Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
ENGLISH
D.COMP LFE
D.COMP LFE CINEMA MUSIC
Set the Surround Parameter
Use
[SURROUND PARAMETER
]
to display the various
surroundparameters,thenselectwit
h
[
o p
]
.
After several seconds, the display returns to normal and the
parameters you have set are entered automatically.
[Selectable items]
D.COMP
(Dynamic range compression):
Optimized setting for late-night listening.
D.COMP only works when playing program sources record in Dolby
Digital or DTS.
LFE
(Low Frequency Effect):
This sets the level of the subwoofer reproducing the low bass sig-
nals.
b
Recommended level
When playing Dolby Digital software: 0 dB
When playing DTS movie software: 0 dB
When playing DTS music software: –10 dB
CINEMA :
When the Dolby Headphone mode is selected, analog, PCM or other
2-channel sources are decoded in the Dolby Pro Logic
g
Cinema mode
and transformed into multiple channels for playback.
MUSIC :
When the Dolby Headphone mode is selected, analog, PCM or other
2-channel sources are decoded in the Dolby Pro Logic
g
Music mode
and transformed into multiple channels for playback.
Playing Dolby Digital/DTS Multi-
Channel Sources (Digital input only)
1
Switchtheinputsource(
v
page20).
(DVDandAUX1digitalinput)
2
Use
[SURROUND]
toselectthe“DOLBYVSREF”or
“DOLBYVSWIDE”.
The “ ” indicator lights.
3
Playsourceswiththe or marksources.
The “ ” or “ ” indicator lights, depending on the playback
source's signal format.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o p
] .
[Selectable items]
Playing Dolby Digital/PCM/Analog 2-
Channel Sources
1
Switchtheinputsource( v page20).
2
Use
[SURROUND]
toselectthe“DOLBYVSREF”or
“DOLBYVSWIDE”.
The “ ” indicator lights.
3
Playsourceswiththe mark.
The “ ” indicator lights, depending on the playback source’s
signal format.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o p
] .
[Selectable items] D.COMP LFE
To check the currently playing source and various
settings
Listening in the Dolby Headphone Mode
1
Switchtheinputsource(
v
page20).
Plug the headphones (sold separately) into the
<PHONES>
jack.
The sound from the speakers is automatically cut off.
2
Press
[SURROUND]
toselectthe“DOLBYH/P”.
The “ ” indicator lights.
3
Playthesource.
4
Use
[SURROUND PARAMETER]
todisplaythevarious
surroundparameters,thenselectwith
[
o p
] .
[Selectable items]
In the stop mode, press [STATUS] .
b
The playback source and the various surround settings are shown
on the display each time the button is pressed.
NOTE
Be careful not to set the volume too high when using headphones.
Pla
ybac
k