2
Getting Started
Operations
Troubleshooting
ENGLISH
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
RS-232C connector
This connector is used for an external controller.
b
If you use an external controller to operate
the unit via the RS-232C terminal, you must
confirm the following beforehand.
q
Turn on the POA-A1HD’s power.
w
Turn off the POA-A1HD’s power from the
external controller.
e
POA-A1HD enters the standby status.
Trigger input jacks
Connect to external equipment that has a trigger
output terminal. When the equipment connected
by this terminal is powered on / off, the power of
the unit can be changed from on / standby.
When using the following functions, set the
CONTROL
switch to “EXTERNAL”.
Connecting the External Controller
Connections and Settings
Wait until all connections have been completed before connecting the power cord.
Connecting the Power Cord
NOTE
• Insert the AC plugs securely. Incomplete connections could cause noise.
• The power plug must be connected to a wall-mounted power outlet.
• Do not connect the unit to an integrated AC outlet on another product or to extension cord.
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
SPEAKERS
To wall-mounted
power outlet
(AC 230 V, 50 Hz)
Power cord (included)
Turning the Power On
(
v
page 13)
Once Connections are Completed
b
In order to fully demonstrate the ability of POA-
A1HD, connect the unit to a larger current ca-
pacity outlet (at least 10 A is recommended).
Also, be sure that the total power consumption
of all devices connected to the outlet does not
exceed the outlet capacity.
1.POA-A1HDE2_ENG.indd 16
2008/01/18 11:34:52
