ENGLISH
Operation
• M a k e s u r e t h a t a l l t h e c o n n e c t i o n s a r e p r o p e r b y
referring to the rear panel.
• C h e c k t h e p o l a r i t y ( p o s i t i v e a n d n e g a t i v e ) o f
connections, and the directivity of stereo separation
(right cord to right channel terminal, and left cord to left
channel terminal).
• Check the directivity of pin cord connection.
Preparation
2
Setting of each knob
• Turn the
VOLUME
control knob counterclockwise, to
minimum position.
• Set the
BASS, TREBLE
and
BALANCE
control knob, to center
position.
• Set the
SOURCE DIRECT
and
P. DIRECT
switches to “OFF (
£
)”.
After checking the above items, turn on the power, the amplifier
is set in the ready mode in a few seconds.
2
Checking connections
POWER
PHONES
BASS TREBLE
BALANCE
VOLUME
REC OUT SELECTOR
INPUT SELECTOR
P. DIRECT
SOURCE DIRECT
MUTING
TUNER
PRESET
DVD / AUX
CD
TUNER
TAPE-2 / MD
TAPE-1 / CD-R
PHONO
DISC
SKIP
FUNCTION
VOLUME
1
Select the input source to be played.
DVD / AUX
CD
TUNER
TAPE-2 / MD
TAPE-1 / CD-R
PHONO
(Main unit)
(Remote control unit)
W h e n “ P H O N O ” i s s e l e c t e d , p r e s s t h e
CARTRIDGE
switch on the rear panel of the main unit to select “MC
(
¢
)” or “MM (
£
)”.
2
Start playback on the selected component.
3
Turn the
VOLUME
,
BASS
,
TREBLE
and
BALANCE
control knob to yield an appropriate
volume and sound quality.
For operating instructions, refer to the component’s
manual.
NOTE:
If
P. DIRECT
button is set to ON position,the
P. DIRECT
terminals are selected, and the input indicator is dimmed
out.
Playing the input source
9
ENGLISH
