background image

III

 

n

NOTE ON USE/HINWEISE ZUM GEBRAUCH/OBSERVATIONS RELATIVES A L’UTILISATION/ 

NOTE SULL’USO/NOTAS SOBRE EL USO/ALVORENS TE GEBRUIKEN/OBSERVERA

WARNINGS

WARNHINWEISE

AVERTISSEMENTS

AVVERTENZE

ADVERTENCIAS

WAARSCHUWINGEN

VARNINGAR

• Handle the power cord carefully.

Hold the plug when unplugging 

the cord.

• Keep the unit free from 

moisture, water, and dust.

• Unplug the power cord when 

not using the unit for long 

periods of time.

• Do not let foreign objects into 

the unit.

• Do not let insecticides, 

benzene, and thinner come in 

contact with the unit.

• Never disassemble or modify 

the unit in any way.

• Naked flame sources such as 

lighted candles should not be 

placed on the unit.

• Do not expose the unit to 

dripping or splashing fluids.

• Do not place objects filled with 

liquids, such as vases, on the 

unit.

• Do not handle the mains cord 

with wet hands.

• When the switch is in the OFF 

position, the equipment is not 

completely switched off from 

MAINS.

• The equipment shall be 

installed near the power supply 

so that the power supply is 

easily accessible.

• Gehen Sie vorsichtig mit dem 

Netzkabel um.

Halten Sie das Kabel am 

Stecker, wenn Sie den Stecker 

herausziehen.

• Halten Sie das Gerät von 

Feuchtigkeit, Wasser und Staub 

fern.

• Wenn das Gerät längere Zeit 

nicht verwendet werden soll, 

trennen Sie das Netzkabel vom 

Netzstecker.

• Lassen Sie keine fremden 

Gegenstände in das Gerät 

kommen.

• Lassen Sie das Gerät nicht 

mit Insektiziden, Benzin oder 

Verdünnungsmitteln in Berührung 

kommen.

• Versuchen Sie niemals das Gerät 

auseinander zu nehmen oder zu 

verändern.

• Auf dem Gerät sollten keinerlei 

direkte Feuerquellen wie 

beispielsweise angezündete 

Kerzen aufgestellt werden.

• Das Gerät sollte keiner tropfenden 

oder spritzenden Flüssigkeit 

ausgesetzt werden.

• Auf dem Gerät sollten keine mit 

Flüssigkeit gefüllten Behälter wie 

beispielsweise Vasen aufgestellt 

werden.

• Das Netzkabel nicht mit feuchten 

oder nassen Händen anfassen.

• Wenn der Schalter ausgeschaltet 

ist (OFF-Position), ist das Gerät 

nicht vollständig vom Stromnetz 

(MAINS) abgetrennt.

• Das Gerät sollte in der Nähe einer 

Netzsteckdose aufgestellt werden, 

damit es leicht an das Stromnetz 

angeschlossen werden kann.

• Manipuler le cordon 

d’alimentation avec précaution.

Tenir la prise lors du 

débranchement du cordon.

• Protéger l’appareil contre 

l’humidité, l’eau et la poussière.

• Débrancher le cordon 

d’alimentation lorsque l’appareil 

n’est pas utilisé pendant de 

longues périodes.

• Ne pas laisser des objets 

étrangers dans l’appareil.

• Ne pas mettre en contact des 

insecticides, du benzène et un 

diluant avec l’appareil.

• Ne jamais démonter ou 

modifier l’appareil d’une 

manière ou d’une autre.

• Ne jamais placer de flamme 

nue sur l'appareil, notamment 

des bougies allumées.

• L’appareil ne doit pas être 

exposé à l’eau ou à l’humidité.

• Ne pas poser d’objet contenant 

du liquide, par exemple un 

vase, sur l’appareil.

• Ne pas manipuler le cordon 

d’alimentation avec les mains 

mouillées.

• Lorsque l’interrupteur est sur 

la position OFF, l’appareil n’est 

pas complètement déconnecté 

du SECTEUR (MAINS).

• L’appareil sera installé près de 

la source d’alimentation, de 

sorte que cette dernière soit 

facilement accessible.

• Manneggiate il cavo di 

alimentazione con attenzione.

Tenete ferma la spina quando 

scollegate il cavo dalla presa.

• Tenete l’unità lontana 

dall’umidità, dall’acqua e dalla 

polvere.

• Scollegate il cavo di 

alimentazione quando 

prevedete di non utilizzare 

l’unità per un lungo periodo di 

tempo.

• Non inserite corpi estranei 

all’interno dell’unità.

• Assicuratevi che l’unità non 

entri in contatto con insetticidi, 

benzolo o solventi.

• Non smontate né modificate 

l’unità in alcun modo.

• Non posizionate sull’unità 

fiamme libere, come ad 

esempio candele accese.

• L’apparecchiatura non deve 

essere esposta a gocciolii o 

spruzzi.

• Non posizionate sull’unità alcun 

oggetto contenente liquidi, 

come ad esempio i vasi.

• Non toccare il cavo di 

alimentazione con le mani 

bagnate.

• Quando l’interruttore 

è nella posizione OFF, 

l’apparecchiatura non è 

completamente scollegata da 

MAINS.

• L’apparecchio va installato 

in prossimità della fonte di 

alimentazione, in modo che 

quest’ultima sia facilmente 

accessibile.

• Maneje el cordón de energía 

con cuidado.

Sostenga el enchufe cuando 

desconecte el cordón de 

energía.

• Mantenga el equipo libre de 

humedad, agua y polvo.

• Desconecte el cordón de 

energía cuando no utilice el 

equipo por mucho tiempo.

• No deje objetos extraños 

dentro del equipo.

• No permita el contacto 

de insecticidas, gasolina y 

diluyentes con el equipo.

• Nunca desarme o modifique el 

equipo de ninguna manera.

• No deberán colocarse sobre 

el aparato fuentes inflamables 

sin protección, como velas 

encendidas.

• No exponer el aparato al goteo 

o salpicaduras cuando se 

utilice.

• No colocar sobre el aparato 

objetos llenos de líquido, como 

jarros.

• No maneje el cable de 

alimentación con las manos 

mojadas.

• Cuando el interruptor está en la 

posición OFF, el equipo no está 

completamente desconectado 

de la alimentación MAINS.

• El equipo se instalará cerca 

de la fuente de alimentación 

de manera que resulte fácil 

acceder a ella.

• Hanteer het netsnoer 

voorzichtig.

Houd het snoer bij de stekker 

vast wanneer deze moet 

worden aan- of losgekoppeld.

• Laat geen vochtigheid, 

water of stof in het apparaat 

binnendringen.

• Neem altijd het netsnoer uit 

het stopkontakt wanneer het 

apparaat gedurende een lange 

periode niet wordt gebruikt.

• Laat geen vreemde 

voorwerpen in dit apparaat 

vallen.

• Voorkom dat insecticiden, 

benzeen of verfverdunner met 

dit toestel in contact komen.

• Dit toestel mag niet 

gedemonteerd of aangepast 

worden.

• Plaats geen open vlammen, 

bijvoorbeeld een brandende 

kaars, op het apparaat.

• Stel het apparaat niet bloot aan 

druppels of spatten.

• Plaats geen voorwerpen gevuld 

met water, bijvoorbeeld een 

vaas, op het apparaat.

• Raak het netsnoer niet met 

natte handen aan.

• Als de schakelaar op OFF 

staat, is het apparaat niet 

volledig losgekoppeld van de 

netspanning (MAINS).

• De apparatuur wordt in de 

buurt van het stopcontact 

geïnstalleerd, zodat dit altijd 

gemakkelijk toegankelijk is.

• Hantera nätkabeln varsamt.

Håll i kabeln när den kopplas 

från el-uttaget.

• Utsätt inte apparaten för fukt, 

vatten och damm.

• Koppla loss nätkabeln om 

apparaten inte kommer att 

användas i lång tid.

• Se till att främmande föremål 

inte tränger in i apparaten.

• Se till att inte insektsmedel 

på spraybruk, bensen och 

thinner kommer i kontakt med 

apparatens hölje.

• Ta inte isär apparaten och 

försök inte bygga om den. 

• Placera inte öppen eld, t.ex. 

tända ljus, på apparaten.

• Apparaten får inte utsättas för 

vätska.

• Placera inte föremål fyllda 

med vätska, t.ex. vaser, på 

apparaten.

• Hantera inte nätsladden med 

våta händer.

• Även om strömbrytaren står 

i det avstängda läget OFF, 

så är utrustningen inte helt 

bortkopplad från det elektriska 

nätet (MAINS).

• Utrustningen ska vara 

installerad nära strömuttaget 

så att strömförsörjningen är lätt 

att tillgå.

Summary of Contents for MC3000










































Reviews: