Denon HEOS Amp HS2, Service Manual

Page: 21 / 71

4. Service Release Type settings update procedures
Write the Service Release Type setting file to this unit from the USB memory.
4.1. Items to Be Prepared
・
Windows PC
・
USB format
：
Prepare a USB memory formatted in FAT16 or FAT32.
Note
：
・
Do not run the USB memory through a hub.
・
Do not connect a computer to the USB port of this unit using a USB cable.
・
Do not use an extension cable when connecting the USB unit.
4.2. Creating a service Release Type setting file
(1) On the PC, click [Start button] – [Accessories] – [notepad] to start the notepad application.
(2) Enter 'TEXT'.
(3) Click the "File" and Click the "Save As..." button.
(4) Input File name "aios-config-release-type-set-3" and Click Save button.
Note
：
Typing the file name surrounded by double quotes.(No need file extention)
(5) Copy the created file to the USB memory.
4.3. Insert the USB memory in the USB port
(1) I nsert the USB flash memory that contains the file created in the steps above to the USB slot on the back panel of this
unit.
(2) Check that the LED on the front panel of this unit is Blue flashing, and then remove the USB flash memory.
The service Release Type settings are complete.
"aios-config-release-type-set-3"
copy to USB flash drive
aios-config-release-type-set-3
21