Denon HEOS Amp HS2, Service Manual

Page: 10 / 71

DISASSEMBLY
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read
"SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing
the work. Failure to shape the wires correctly may cause problems such as noise.
SIDE COVER
See "DISASSEMBLY
1. SIDE COVER"
and
"EXPLODED VIEW"
ORNAMENT , SIDE L ASS'Y
(Ref. No. of EXPLODED VIEW : P4)
ORNAMENT , SIDE R ASS'Y
(Ref. No. of EXPLODED VIEW : P5)
SIDE KEY PCB
(Ref. No. of EXPLODED VIEW : C4)
TOP COVER
See "DISASSEMBLY
2. TOP COVER"
and "EXPLODED VIEW"
TOP COVER ASSY
(Ref. No. of EXPLODED VIEW : P3)
BOTTOM COVER
See "DISASSEMBLY
3. BOTTOM COVER"
and "EXPLODED VIEW"
COVER , BOTTOM ASS'Y
(Ref. No. of EXPLODED VIEW : P2)
FRONT COVER
See "DISASSEMBLY
4. FRONT COVER"
and "EXPLODED VIEW"
FRONT PANEL HEOSAMP
(Ref. No. of EXPLODED VIEW : P1)
FRONT LED PCB
(Ref. No. of EXPLODED VIEW : C6)
DIGITAL ASSY
See
"DISASSEMBLY
5. DIGITAL ASSY"
and "EXPLODED VIEW"
CONNECT PCB
(Ref. No. of EXPLODED VIEW : C3)
DIGITAL PCB
(Ref. No. of EXPLODED VIEW : C7)
MODULE, AIOS4000 LEGO MODULE
(Ref. No. of EXPLODED VIEW : C8)
MAIN ASSY
See
"DISASSEMBLY
6. MAIN ASSY"
and "EXPLODED VIEW"
MAIN PCB
(Ref. No. of EXPLODED VIEW : C1)
SMPS PCB
(Ref. No. of EXPLODED VIEW : C2)
DC IN PCB
(Ref. No. of EXPLODED VIEW : C10)
REAR LED PCB
(Ref. No. of EXPLODED VIEW : C5)
10