12
ENGLISH
7
SCRATCH
1
Set the Scratch mode
q
Push the DISC MODE
button to set Scratch
Disc to scratch mode.
The DISC MODE button light
up in orange.
• If scratching is possible, the LED for the
selected source flashes.
:
OFF
ON :
DISC MODE
SEARCH/
BEND
SCRATCH
2
[Start the Scratching]
w
When SCRATCH is selected
as the Disc mode and
Scratch Disc is turned by
hand, the CD sound is
scratched.
The stroke of a scratch can
be selected at
⁄4
PRESET
“(3) Scratch stroke”.
• Scratching may not possible
immediately, because for example the
disc memory has not been fully loaded
yet.
6
NEXT TRACK
• It’s now possible to select the beginning of the next
track to be played while continuing playback of the
current track without interrupting playback.
*Crossfade can also be used for a smooth
transition.
1
2
-1
Enter Next Track mode
q
When the NEXT TR./B TRIM
button is pushed during
playback, the NEXT TRACK
function is turned on.
• When this mode is set, CUE
button blink.
• When the button is pushed again, the
NEXT TRACK mode is turned off.
• However, when seamless loop point B
is set, the point B trim mode is
selected. In this case press the button
again to turn the trim mode off.
Select the track
w
Turn the PARAMETERS
knob and select for the
next track to be played.
2
-2
Select the MEMO
e
The CUE point of MEMO can
be selected as NEXT TRACK.
• When the NEXT TRACK with which
MEMO is memorized is selected, the
MEMO indicator lights up.
• If the MEMO button is pushed at this
time, the CUE point is memorized as
the NEXT TRACK & point to be
selected.
• The MEMO will be canceled if another
track is selected by PARAMETERS
knob or the MEMO button is pushed
again.
NEXT TR.
/B TRIM
3
Track search start
r
When the CUE button is
pushed after selecting the
track, current playback
continues as the next track
is searched for and the
standby mode is set.
When the standby mode is
set, the CUE button lights
up and the PLAY/PAUSE
button flashes.
• During this time, if a
loop of 8 seconds or
less is actively looping, it will continue to
loop until PLAY is ultimately pressed.
If a loop is over 8 sec, you must first
EXIT from the loop in order to enter
Next Tr mode.
CUE/STUTTER
CUE
PLAY/PAUSE
MP3 SEARCH MODE
PARAMETERS
PUSH
TRACK SEARCH
w
q
MP3 SEARCH MODE
A1
RELOOP
EXIT/
B
A2
PARAMETERS
PUSH
TRACK SEARCH
NEXT TR.
/B TRIM
CLR
A
FLIP
QUICK JUMP
FAST SEARCH
e
r
t
ON
CUE/STUTTER
CUE
PLAY/PAUSE
POWER
:
OFF
DRAG-S
BRAKE
ON :
TAP
PRESET
CONT.
TIME
/SINGLE
MEMO
TITLE
RVS
ECHO
/LOOP
DISC MODE
FILTER
OFF
SEARCH/
BEND
SCRATCH
AUTO
DISC EJECT
4
-1
• The time display indicates the
remaining playback time for data in the
memory after CUE is pressed.
NOTE:
The amount of time for which
playback of the currently continuing
track can be continued is a maximum
of 10 seconds from the time searching
for the next track starts.
PLAY/PAUSE
ON
CUE/STUTTER
CUE
PLAY/PAUSE
POWER
:
DRAG-S
BRAKE
ON :
TAP
PRESET
CONT.
TIME
/SINGLE
MEMO
TITLE
RVS
ECHO
/LOOP
DISC MODE
FILTER
FLANGER
OFF
BEND
AUTO
DISC EJECT
q
w
,
e
3
Stop the Scratching
e
When the SCRATCH DISC is released,
scratch play stops and normal play or pause
mode is set.
✽
The time after which the normal play or
pause mode is set after scratch play stops
can be selected at
⁄4
PRESET “(4)
Scratch”.
4
-2
✽
The currently playing track can be faded
out when starting to play a different track.
The fade out time can be selected at
⁄4
PRESET “(2) Next Track”.
• If the PLAY/PAUSE button is not
pushed after standing by at the next
track, (when in the CONT.) playback
mode, playback of the next track starts
once all of the currently playing
playback data has been played.
The same goes for SINGLE playback
mode.
Next Track playback start
t
When the PLAY/PAUSE
button is pushed, the
current playback is
stopped and playback of
the next track starts.
3
