16
ENGLISH
9 USING THE TIMER
(1) Setting the Current Time (24-hour display)
Example: Setting the current time to 19:30
1
Turn on the power.
2
Press the TIMER button for at least
3 seconds.
• “TIME” is displayed.
✽
If the time is already set,
“EVERYDAY” is displayed.
Press one of the PRESET/TUNING
buttons to display “TIME”, then
perform step 3.
7
Press the MEMORY/SET button
at the sound of the chime of a
time service, etc.
• “30” stops flashing, remaining
lit, and the current time is
displayed.
✽
The number changes continuously when one of the
tuning buttons (TUNING UP or DOWN) is pressed.
✽
If the time is already set when step 2, 3 is performed,
both the hours and minutes positions flash.
MEMORY
/ SET
CH
MHz
TUNED
STEREO
AUTO
TIMER
BAND
/ RDS
MEMORY
/ SET
DOWN
UP
PRESET / TUNING
PHONES
FUNCTION
VOLUME
SOURCE DIRECT
MODE
ON / STANDBY
STEREO RECEIVERER DRA-201SA
2
3, 5, 7
4, 6
1
ON / STANDBY
TIMER
5
Press the MEMORY/SET button.
• “19” stops flashing, remaining
lit, and the minutes position
starts flashing.
MEMORY
/ SET
Use the PRESET/TUNING
buttons to input the
minutes (30).
• “30” flashes in the
minutes position.
6
DOWN
UP
PRESET / TUNING
3
Press the MEMORY/SET button.
• The hours position flashes.
MEMORY
/ SET
Use the PRESET/TUNING
buttons to input the hours
(19).
• “19” flashes in the hours
position.
4
DOWN
UP
PRESET / TUNING
(2) Before Setting the Timer
2
Be sure to set the current time. If the current time is not set, the timer standby indicator (“
”) will not light and the
timer will not function.
2
Be sure to preset the station before setting the timer. (Refer to “Presetting AM and FM stations” on page 14.)
2
The DRA-201SA is equipped with two types of timers: the everyday time which turns the power on and off at the
same times every day, and the once timer that turns the power on and off only once.
2
Do not change the timer standby mode after the timer is activated (after the timer on time is reached). The timer may
not operate properly.
2
It is not possible to set the timer start and end times to the same time.
2
If the display or operation is not normal, unplug the power cord, then plug it back in while pressing the memory/set
button (MEMORY/SET). This restores the tuner to the initial default values. After doing this, reset the presettings,
current time and timer settings.
2
When setting the timer to operate the CD player, MD recorder or cassette deck, do so with a disc or cassette loaded
and the disc holder or cassette holder closed. The timer will not operate properly if no disc or cassette is loaded or if
the disc holder or cassette holder is open.
(3) Setting the Timer
2
The timer function lets you switch the power between
the on and standby modes automatically at the desired
times.
2
When connected in a system with the 201SA series,
the timer can be used to play a CD, cassette or MD or
to record from the tuner onto the MD recorder or
cassette deck (“air check”).
Example: Using the everyday timer to listen to the
station stored at preset number 3 (FM 98.00 MHz)
from 12:35 to 12:56
1
Turn on the power.
2
Press the TIMER button for at least
3 seconds.
• “EVERYDAY” is displayed.
TIMER
ON / STANDBY
CH
MHz
TUNED
STEREO
AUTO
TIMER
BAND
/ RDS
MEMORY
/ SET
DOWN
UP
PRESET / TUNING
PHONES
FUNCTION
VOLUME
SOURCE DIRECT
MODE
ON / STANDBY
STEREO RECEIVERER DRA-201SA
2
4, 6, 8,10,12,14,16
1,18
3, 5, 7, 9,11,13,15,17
✽
If the time is not set, “TIME” is displayed.
Perform steps 3 to 7 on page 16, then start
the timer setting over.
Press one of the
PRESET/TUNING buttons
to display “EVERYDAY” or
“ONCE”.
DOWN
UP
PRESET / TUNING
3
4
Press the MEMORY/SET button.
• This sets the unit to the timer
setting mode’s function
setting mode.
MEMORY
/ SET
Example: When the everyday timer is
selected
5
Use the PRESET/TUNING
buttons to switch the
function to “TUNER”.
DOWN
UP
PRESET / TUNING
✽
The function switches as follows each time
the button is pressed:
: When the TUNING UP button is pressed.
: When the TUNING DOWN button is
pressed.
6
Press the MEMORY/SET button.
• “TUNER” is stored in the
memory as the timer function.
MEMORY
/ SET
Use the PRESET/TUNING
buttons to set preset
number 3.
DOWN
UP
PRESET / TUNING
7
8
Press the MEMORY/SET
button.
• The preset station is stored in
the memory and the timer on
time setting mode is set.
MEMORY
/ SET
<Setting the
PRESET/TUNING on time>
Use the tuning buttons to set
the hours position to “12”.
9
DOWN
UP
PRESET / TUNING
