13
3. DEVICE OPERATION
1. Select a folder with the
4
/
¢
jog wheel, and press it. Then the files in the folder are
displayed.
2. Press the
4
/
¢
jog wheel to determine the file selection then press the
6
button to
start playback.
2. Programmed playback
• For a file with the extension “m3u”(playlist file) under the root in an SD card, programmed
playback is performed in the order described in the file.
• Any file that is not described in the m3u file is excluded from playback and is not displayed
on the file list. The full path of each file is displayed.
FILE LIST
EXIT
LOAD
PROGRAM PLAY
\ MPGLANG \ abcdefg.MP3
\ MPGLANG \ Honey01.MP3
\ MPGLANG \ abcdefg0.MP3
\ MPGLANG \ abcdefg6.MP3
003
\ MPGLANG \ abcdefg1.MP3
004
\ MPGLANG \ abcdefg2.MP3
005
\ MPGLANG \ abcdefg3.MP3
006
\ MPGLANG \ abcdefg4.MP3
007
\ MPGLANG \ abcdefg5.MP3
009
\ MPGLANG \ abcdefg7.MP3
010
002
001
008
1. Press the
6
button to start programmed playback.
3. Hot-start playback
• You can register files to the hot start buttons 1–20 of the RC-F400S and play back a registered
file by merely pressing the corresponding button.
• See page 14 for details on how to register.
■
NOT PLAY setting
Set the files not to be played.
0123456789012345678901234567
abcdefg.MP3
abcdefg(Remix).MP3
Honey01.MP3
abcdefg05.MP3
FILE LIST
003
abcdefg00.MP3
004
abcdefg01.MP3
005
abcdefg02.MP3
006
abcdefg03.MP3
007
abcdefg04.MP3
---
009
002
001
EXIT
LOAD
NOT
PLAY
\ MPGLANG \
1. Select a file not to be played with the
4
/
¢
jog wheel.
2. Press the NOT PLAY button.
3. “Completed” is displayed on the display unit.
4. When setting is completed, Track No display is changed to “---“. (Example: “Track008”
changes to “---“.)
■
ENABLE setting
Cancel the setting of NOT PLAY to enable a file played back.
0123456789012345678901234567
FILE LIST
EXIT
LOAD
\ MPGLANG \
abcdefg.MP3
abcdefg1.MP3
Honey01.MP3
abcdefg7.MP3
003
abcdefg2.MP3
004
abcdefg3.MP3
005
abcdefg4.MP3
006
abcdefg5.MP3
007
abcdefg6.MP3
---
009
002
001
ENABLE
1. Select a file to be played with the
4
/
¢
jog wheel.
2. Press the ENABLE button.
3. “Completed” is displayed on the display unit.
4. When setting is completed, Track No display “---“ is changed to “XXX“. (Example: the
display for Track002 changes to “002“.)