9
Assigning Sources to the Input Connectors
This screen appears when the
Input Setup
►
Each Input Source
►
Input Assign
menu is selected. Use the
Input Assign menu to route the HDMI inputs, digital inputs, and component inputs to the different sources.
1.
If DN-700AV is powered off, press the
Power
button to power it on.
2.
Press the
Menu
button on the remote control. Use the
,
,
◄
,
►
buttons to navigate to the
Input Setup
►
Each Input Source
►
Input Assign
menu.
3.
Use the
,
,
◄
,
►
buttons to move to the source you want to set.
4.
Press
Enter
, then use
cursor
◄
and
►
buttons to select the input to be assigned.
5.
Press
Enter
to save the setting.
Notes:
•
An input source to which an HDMI input connector cannot be assigned will be seen as
– – –
.
•
To play the video signal assigned at
HDMI
combined with the audio signal assigned at
Input Assign
►
Digital
, select
Digital
in the
Input Mode
.
•
When
HDMI Control
is set to On, the HDMI input cannot be assigned to
TV
.
Using the Dock Audio Inputs for Media Playback
1.
If DN-700AV is powered off, press the
Power
button to power it on.
2.
Connect your media device to the Dock inputs on DN-700AV.
3.
Press
Dock
on the remote control or use the
Source Select
knob to choose
Dock
as the audio input source.
4.
Start playback from your media device and adjust the source volume.
Playing Files on a USB Flash Drive
A USB flash drive can be connected to the USB port of this unit to play music and picture files. Only USB flash
drives conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on
DN-700AV, in the FAT16 or FAT32 format.
The supported file formats are:
WMA
(Windows Media Audio),
MP3
(MPEG-1 Audio Layer-3),
WAV
,
MPEG-4
AAC
, and
FLAC
(Free Lossless Audio Codec).
To play files on a USB flash drive:
1.
If DN-700AV is off, press the
Power
button to power it on.
2.
Connect your USB flash drive (mass storage class) to the USB port.
3.
Select
Multimedia
as your desired media type and use the
Cursor
◄
and
►
buttons on the remote control to
select
USB
.
4.
Select a file from the list displayed on DN-700AV or your TV/computer monitor.
To move through audio files or folders, press the
Cursor
◄
and
►
buttons on the remote control.
Press
Enter
to open a folder or to select an audio file to begin playing.
Playing Audio from a Bluetooth Device
1.
If DN-700AV is powered off, press the
Power
button to power it on.
2.
Use the
Source Select
knob to choose
Bluetooth
.
3.
Press the
Bluetooth
button.
4.
Navigate to your Bluetooth device’s setup screen, find “DN-700AV” and connect.
5.
Begin to play music on your Bluetooth device.
To disconnect a paired Bluetooth device, press and hold the
Bluetooth
button for 3 seconds. Alternatively,
use the
Source Select
knob to choose another playback source and disconnect pairing.
Note:
If your Bluetooth device prompts for a pairing code, enter
0000
.
