6
Remote Control
Power:
Turns the power on and off for the unit.
Mute:
Silences the sound output. Press again to resume the sound output.
Zone On/Off:
Turns on/off the video/audio output for the selected zone.
Zone Select:
Map Zone 2 to the desired source input.
Display:
Press to view the input source settings on your TV or computer monitor.
Stereo Direct:
In Stereo Direct mode, the audio is played back as close to how it was originally
recorded.
Menu:
Access the settings for adjusting video settings, audio settings, input sources, system
settings, and the Setup Wizard.
Speaker Setup:
Adjust the parameters for surround sound speaker outputs. Select the type of
speaker (small or large) connected to the surround outputs using the
or
buttons.
Cursor Buttons:
Selects an audio track or navigates through the menus.
Enter:
Press to confirm a
menu selection.
Back:
Press to
go to the previous menu or exit out of a menu.
OSD:
Press to turn off the on-screen front panel display.
DVD:
Selects the DVD input source.
BD:
Selects the BD input source.
DOCK:
Selects the Dock input source.
SAT/CBL:
Selects the SAT/CBL input source.
CD:
Selects the CD input source.
Multimedia:
Selects the Multimedia input source.
BT:
Selects the BT input source.
FM:
Selects the FM input source.
HDMI:
Press to cycle through one of the 6 HDMI input sources.
Surround:
Select from the different surround sound modes.
DTS/Dolby:
Selects DTS or Dolby sound types.
When playing back audio sources encoded in DTS,
accurate sound field position and realistic sound is heard similar to being in a movie theater. When
Dolby is selected, this multi-channel digital signal format uses 5.1 channels: 3 front channels (“FL”,
“FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequencies.
Because of this, there is no crosstalk between channels and a realistic sound field with a “three-
dimensional” feeling (sense of distance, movement and positioning) is achieved.
Audio In:
Select an audio input to map to the currently selected source. Select from
HDMI
,
Analog
,
Coax
(coaxial), and
Opt
(optical).
S/-:
Press these buttons to cycle through one of 20 radio station memory locations.
Tone:
Adjusts the treble and bass qualities for the sound source.
Channel Select:
Press this button to cycle through each of the surround sound channels. Press the
or
buttons to adjust the channel level.
/-:
Adjust the master volume for the input source.
|<<:
Skip to the previous USB track or Bluetooth track.
>>|:
Skip to the next USB track or Bluetooth track.
Play/Pause:
Play/pause the USB track or Bluetooth track.
Stop:
Stops the currently playing USB track or Bluetooth track.
Stereo:
Press to select to have a stereo signal outputted alone or to have a stereo signal with the
subwoofer output.
Stereo/Mono:
Press this button to alternate between Stereo mode and Mono mode.
Sub On/Off:
Turn the subwoofer audio output on/off.
LFE Trim:
This Low Frequency Effect emphasizes low frequency sound, outputting 20 Hz to 120 Hz
bass. This adjusts the level of the low-frequency effects channel in a movie soundtrack or multi-
channel music recording. Note that this is not a subwoofer level control, so it will work only on 5.1
channel soundtracks that contain a LFE.
Tuning -/+:
Selects the FM radio station.
Memory:
When playing back files from a network/media server or listening to the radio, press
Mem
to register the file/radio station as a favorite preset.
PTY (Program Type) Search:
In Tuner mode,
press this button to search for and store a certain style of
radio programming.
ZONE
ON/OFF
SEL
DISPLAY
STEREO
DIRECT
MENU
SPK
SET
ENTER
OSD
DVD
DOCK
BD
MULTI
MEDIA
CD
SAT/CBL
BT
FM
HDMI
AUDIO
IN
DTS/
DOLBY
SURR.
TONE
CH SEL
STATION
+
-
+
-
VOL
STEREO
ST/MONO
SUB
ON/OFF
LFE TRIM
+
-
MEM
PTY
TUNING
►ǁ
►►
|
|
◄◄
