ENGLISH
7
5
BASIC OPERATION
PLAY/PAUSE and CUE
★
The operation switches between playback and pause
each time the PLAY/PAUSE button is pressed.
★
When the CUE button is pressed during playback,
the pickup returns to the position at which playback
was started.
The diagrams below show playback patterns when the
PLAY/PAUSE and CUE buttons are pressed.
PLAY and PAUSE
PLAY/PAUSE
button
pressed
PLAY/PAUSE button
pressed
Position on disc
Section
played
PLAY/PAUSE
button
pressed
Section played
Pause mode set at this point
When the PLAY/PAUSE button is pressed, playback
starts and proceeds as shown by the arrow on the
diagram above.
If the PLAY/PAUSE button is pressed again during
playback, the pause mode is set at that point. Press
the PLAY/PAUSE button again to resume playback.
PLAY and CUE
PLAY/PAUSE
button
pressed
CUE button pressed
Position on disc
Section
played
Back Cue
When the CUE button is pressed after starting
playback by pressing the PLAY/PAUSE button, the
pickup returns to the position at which playback was
started and prepares for the next playback.
Press the PLAY/PAUSE and CUE buttons alternately
to start playback repeatedly from the same position.
(Checking the playback position)
This function is called “Back Cue”.
PLAY, PAUSE and CUE
PLAY/PAUSE button
pressed
PLAY/PAUSE
button
pressed
PLAY/PAUSE
button
pressed
Section
played
Position on disc
CUE
button pressed
Section played
If the pause mode is set and playback is then
resumed, the position to which the pickup returns
with the Back Cue function changes.
Sleep mode
•
The sleep mode is set if no operation is
performed for 30 minutes while in the standby
or pause mode. In the sleep mode, disc rotation
is stopped in order to reduce wear due to
unnecessary rotation of the motor.
•
The sleep mode can be canceled by pressing
the PLAY/PAUSE or CUE button.
Starting playback from the Middle
of a track (Manual Search)
★
When the track is selected with the track button
and the PLAY/PAUSE button is pressed, playback
starts from the beginning of that track. If you wish
to start from a different position, use the
procedure described below to search for the
desired position.
1
Find the play start position.
Press the JOG MODE button to set the
jog/shuttle dial to the search mode.
Turn the shuttle dial to change the playback
position quickly. (Search for the approximate
playback position.)
RVS
FWD
The fast forward/reverse mode
is set when the shuttle dial (outer
side) is turned.
The speed changes according
to the angle at which the dial is
turned.
•
When operated during playback, playback
resumes after the operation.
•
When turned fully in either direction, the disc
skips 1 minute forward or backward then
plays for 3 seconds, and this is repeated.
2
Turn the jog dial. (Search for the precise
playback position.)
RVS
FWD
When the jog dial (inner side) is
turned, the frame move mode
is set.
The playback position can be
moved in units of one frame.
Listen to the sound and find the desired play
start position.
Stuttering
1
In the standby mode, press the CUE button.
•
Playback starts immediately from the cue
point when the button is pressed and stops
when the button is released.
6
PITCH/PLATTER
★
There are two ways to change the playing speed.
•
Adjust the Pitch using the pitch slider.
•
The PITCH BEND button or jog dial can be used to temporarily change the pitch.
★
The playing speed can be changed greatly to achieve effect similar to those achievable with analog discs.
Pitch/Platter-H
1
-1
[Pitch slider]
Set the variable speed mode.
Press the PITCH button to light the PITCH LED.
1
-2
Pitch
decreases
The Pitch decreases when
the pitch slider is moved
upwards, increases when
the pitch slider is moved
downwards.
Pitch
increases
•
The pitch can be locked by pressing the
PITCH button again.
2
-1
[PITCH BEND button]
Press the PITCH BEND + (or PITCH BEND –)
button.
•
The Pitch increases or decreases temporarily
while the PITCH BEND + or PITCH BEND –
button is pressed.
•
The extent to which the PITCH BEND button
changes the Pitch is proportionate to the
amount of time the button is pressed. The
longer the button is held down, the greater
the percentage of change.
2
-2
Set the jog dial to the pitch bend mode.
Press the JOG MODE button to light the “
”.
•
The playing speed increases gradually when
the jog dial is turned clockwise and
decreases gradually when the jog dial is
turned counterclockwise. When you stop
turning the jog dial, the playing speed
returns to the previous speed.
•
When playback is stopped, the jog/shuttle
dial is set to the search mode.
3
Set the jog dial to the platter hold mode.
Press the JOG MODE button to light the “
”.
•
The playing speed changes in function of the
speed at which the jog dial is turned,
resulting in a sound similar to that of when
using an analog disc.
•
The playing speed increases when the jog
dial is turned clockwise and decreases when
the jog dial is turned counterclockwise.
When you stop turning the jog dial, the
playing speed returns to the previous speed.
Platter-S
1
Select the brake or platter mode.
Press the Jog mode button to light the “
”.
•
The platter stop effect is achieved when the
PLAY/PAUSE button is pressed during
playback and the platter start effect is
achieved when the PLAY/PAUSE button is
pressed in the standby or pause mode. The
platter stop and start effects are effect
sounds similar to when playback is started or
stopped on an analog player.
★
Use this function to achieve effect similar to analog
players.
