ENGLISH
5
TABLE OF CONTENTS
z
Main features ………………………………………5
x
Connections/Installation ……………………………5
c
Part names and functions ………………………5, 6
v
Compact discs ………………………………………6
b
Basic operation ……………………………………7
n
Pitch/Platter …………………………………………7
m
Other functions ……………………………………8
,
Cleaning the optical pick-up lens …………………8
.
Specifications ………………………………………8
2
ACCESSORIES
Check that the following parts are included in addition to the main unit:
q
Operating instructions ……………………………1
w
Connection cords for signal output (RCA)
……2
e
Remote control unit (RC-47) ……………………1
r
Remote control connection cable ………………1
The DN-1800F is a double CD player which provides
excellent performance as well as a variety of functions
ideal for DJ mixing.
Control section
1. The DN-1800F can be easily mounted on a
standard 19-inch rack.
2. Improved visibility thanks to a large fluorescent
display and disc holder illumination.
Functions
1. Auto Level Search / Instant Start
2. Pitch Bend (Button & Jog)
3. Platter
The playing speed can be gradually lowered to play
and stop discs with a sound similar to that of analog
discs.
4. Relay Play
When this mode is set, CD1 and CD2 starts
playback alternately.
This unit can relay the playback of CD1 and CD2
every track or every disc.
5. Fader input
6. Servo Auto Stop function for Spindle Motor /
Disc Holder Auto Close
1
MAIN FEATURES
1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your
mixer.
3. Connect the control cord to the REMOTE connector
on the RC-47.
CAUTION:
•
Be sure to use the supplied control cord. Using
another type of cable may result in damage.
•
Be sure the power is off when connecting the
control cord. Otherwise the units may not work
properly.
•
Never connect any remote controllers other than
the RC-47.
Doing so can damage the equipment.
2
CONNECTIONS/INSTALLATION
15
°
DN-1800F
The DN-1800F will work normally when
the player unit is mounted within 15
degrees off the vertical plane at the
front panel. If the unit is tilted
excessively, the disc may not be loaded
or unloaded properly.
3
PART NAMES AND FUNCTIONS
(1) DN-1800F Front Panel
q
POWER button (
¢
ON
£
OFF)
•
Press this button to turn the power on.
NOTE:
•
Be sure to close the disc holders before turning
off the power.
w
POWER indicator
•
This lights when the power is on.
e
Disc holder
•
Place discs in this holder.
•
Press the disc holder OPEN/CLOSE button to
open and close the disc holder.
CAUTION:
•
Do not place foreign objects in the disc holders.
Doing so could damage the player.
•
Do not push the disc tray in manually when the
power is off, as this may result in malfunction
and damage the player.
r
Disc holder LED
•
This flashes while the disc holder is opening
and closing.
•
The LED lights when the disc holder is open
and serves as the disc holder illumination.
t
Disc holder OPEN/CLOSE button
•
Press this button to open and close the disc
holder.
•
The disc holder will not open during playback.
Stop playback before pressing this button.
(2) DN-1800F Rear Panel
y
Analog output jacks 1, 2
(ANALOG OUT 1, 2)
•
These are unbalanced output jacks. The audio
signals from the CD players are output from
these jacks.
u
Digital output jacks 1, 2
(DIGITAL OUT 1, 2)
•
Digital data is output from these jacks
according to the presettings.
•
We recommend using a 75
Ω
/ohm pin cord
(available in stores) for connections.
NOTE:
•
Turn PITCH control OFF when making digital
recordings. Most digital recorders will not
accept a variable pitched digital signal.
i
Fader input jacks 1, 2 (FADER 1, 2)
•
Use this when using the unit with a console
fader. (Mini Jack)
(FADER INPUT LEVEL HCMOS (Ii=–3mA))
•
The fader can be activated using the switch
circuit shown on the diagram below.
GND
*
SW 2
SW 1
Lch
GND
•
Connect SW1 to the “Lch” stereo mini jack.
•
Connect SW2 to the “GND” stereo mini jack.
•
Connect GND* to the analog output “GND”
terminal.
•
Do not use the “Rch” jack.
•
When SW1 is pressed, playback starts from the
cue point.
•
When SW2 is pressed, playback stops and
resumes the cue point.
o
Remote control connector (REMOTE)
•
Connect this connector to the RC-47 control unit
using the included control cord.
(3) RC-47 Front Panel
!0
Jog dial (inner side)
•
In the search mode, turn this dial during the
search operation to move the playing point in
units of frames.
•
In the pitch bend and plat-H modes, turn this to
change the playing speed.
!1
Continue/Single button
(CONT./SINGLE)
•
Press this button to switch between the single,
continuous, single relay and continuous relay
play modes.
•
The selected mode is indicated by the
“SINGLE” or “CONTINUE” indicators on the
display.
•
“SINGLE” or “CONTINUE” flashes when in the
relay play mode.
!2
JOG MODE button
•
Press this button to select the jog dial operating
mode.
Search mode:
Turn the dial clockwise to move the playback
position forward, counterwise to move the
playback position backward.
One click corresponds to one frame of
movement.
