Denon DMD-F101, Operating Instructions Manual

Page: 16 / 36

16
11 VARIOUS RECORDING FUNCTIONS
1. Adding track numbers during recording
• Track numbers can be added during recording regardless of the recording mode.
1
During recording, press the MULTI REC button.
• When the MULTI REC button is pressed during
recording, a track number is added at that point.
• A new track number cannot be added for
approximately 4 seconds after the last track number.
2. Stopping recording temporarily
• Recording can be stopped temporarily then resumed from the same point.
1
During recording, press the
1 3
(play/pause) button.
• When the
1 3
(play/pause) button is pressed during
recording, the pause mode is set at that point and the
track number changes.
• Press the
1 3
(play/pause) button to r esume
recording.
• A blank section of approximately 2 seconds is inserted before recording resumes.
3. Recording from a point 6 seconds back ......................................................
• With this function you can start recording from a point up to 6 seconds back in the sound that was being input to the
set when the recording pause mode was set.
Memory Recording
• Use this function to prevent missing the beginning of the satellite broadcast or other program you want to record
using the “AIR CHECK” function.
1
2
Perform the operations under “Starting recording” on Pages 14 and 15.
• To record an analog input, perform steps 1 to 8 under “Analog recording”.
• To record a digital input, perform steps 1 to 7 under “Digital recording”.
Press the MEMORY REC button.
• Recording starts from a point up to 6 seconds before the button was pressed.
• “Memory Rec” is displayed.
• To cancel the memory rec mode, press the
2
(stop) button.
• Recording stops and the TOC data is written on the MD.
1
18T r 0 2 m 4 6 s
-60 40 -30 -20 -12 -6 -2 0
L
dB
R
POWER LOADING MECHANISM
ON / STANDBY
MINIDISC RECORDER DMD-F101
INPUT
- +
MULTI REC CD SRS EDIT
1 3
REC LEVEL
/ ENTER
MEMO REC /
CHARACTER
1
1
18T r 0 2 m 4 6 s
-60 40 -30 -20 -12 -6 -2 0
L
dB
R
POWER LOADING MECHANISM
ON / STANDBY
MINIDISC RECORDER DMD-F101
INPUT
- +
MULTI REC CD SRS EDIT
1 3
REC LEVEL
/ ENTER
MEMO REC /
CHARACTER
1
Press the MULTI REC button.
1st track 2nd track
(Recording continues.)
q
Press the 1 / 3 (play/pause) button.
w
Press the
1
/
3
(play/pause) button.
1st track 2nd track
(Pause)
(1) Press the MULTI
REC button.
(2) Press the
MEMORY REC
button.
(Recording stopped)
Set mode
Recorded section
6 seconds
1
18T r 0 2 m 4 6 s
-60 40 -30 -20 -12 -6 -2 0
L
dB
R
POWER LOADING MECHANISM
ON / STANDBY
MINIDISC RECORDER DMD-F101
INPUT
- +
MULTI REC CD SRS EDIT
1 3
REC LEVEL
/ ENTER
MEMO REC /
CHARACTER
2
REC PAUSE REC
NOTE:
• The set stores in the memory the sound which is being input at the point when the recording pause mode is set.
Thus, the sound from 6 seconds ago cannot be recorded if recording is started more than 6 seconds after the
recording pause mode is set.
In addition, if the input is switched with the INPUT button (INPUT) in the 6 seconds before memory recording is
started, the sound recorded before the input was switched may be recorded.
NOTE:
• When TOC writing starts, the “ ” indicator flashes. Do not shake the main unit, or unplug the power cord
while the TOC is being written. If the data is not recorded properly, it will not be possible to play the disc.