Denon DCD-A100, Service Manual

Page: 14 / 127

14
SPECIAL MODE TRANSITION DIAGRAM
SERVICE MODE
1. Initial Setting Mode
1.1. procedure
(1) Initialize the CD player when μcom, peripheral parts of μcom, or P.W.B. has been replaced in servicing.
(2) All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(3) Carry out the following to restore factory setting mode.
POWER switch is turned to on while pressing the
2
and
9
buttons simultaneously on the main unit.
Display "RESET" on the FL tube, then keep pressing the two buttons until "RESET" turns off.
H.R.NORMAL MODE
“NORMAL”
TEST MODE
“Test Mode”
H.R.SHORT MODE
“SHORT”
H.R.CHACKING MODE
“CHACKING”
AGING MODE
“Aging Mode”
2
+
5
+ POWER_ON
2
8
or
1
/
3
9
8 9
1
/
3
1
/
3
1
/
3
8 9
9
※ The tray opens and stops.
If loading an SACD, do not
carry out the next operation
until the title display ends
and “Aging Mode” is
displayed again.
H.R.NORMAL operation
TOC read
→ playback
title-all of the disc. →
OPEN → CLOSE →
TOC read
It displays repeatedly.
H.R.SHORT operation
TOC read
→ playback
title-end of the disc.
→
OPEN
→
CLOSE
→
TOC read
It displays repeatedly.
H.R.CHACKING operation
TOC read
→ OPEN →
CLOSE
→
TOC read
It displays repeatedly.
No Error contents FL display
1 Tray Error ERROR 01
2 Bad Disc
3 Search Error
4 Read Error
ERROR 02
ERROR 03
ERROR 04
Heat run Error Code Table