Denon DCD-A100, Service Manual

Page: 11 / 127

11
5.2 Store the current value of the laser current : CD
(1) Current value “T22” is selected.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
- - - T 2 2 - n n n n - -
(2) Press the
1
/
3
button for at least 5 seconds, and "SAVE?" is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
- - - T 2 2 S A V E ? - -
(3) Press the
8
or
9
button to select “T21”.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
- - - T 2 1 - m m m m - -
(4) Press the
1
/
3
button and store the current value "T21". After “OK?” is displayed, stored value “T21” is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
- - - T 2 1 - - O K ! - -
(5) Press the
2
button to display the current value “T22” without storing the current value “T21”.
6. Resetting the accumulated laser on time
To clear the accumulated laser on time, press the
1
/
3
button while the accumulated laser on time is displayed until
"
＊
CLR?" appears at the "nnnnn" position, then press the
8
or
9
button to select TB3. If the
1
/
3
button is
pressed while TB3 is displayed, the accumulated laser on time of CD and DVD(SACD) is cleared.When “TB1” or “TB2”
is selected with the
8
or
9
button, "nnnnn" is displayed as 0 so you can check.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
- - - T B Y n n n n n - -
(
-
: Off, Y
：
1: CD, 2: DVD(SACD), nnnnn: Hour [h])