10
10
D-AJ03
1. CD test
Outline: Readout of the set value after automatic adjustment (for judging difference from initial value)
Forced operation of pickup (Inner/Outer circumference feed)
During the PLAY mode, the number of errors accumulated for 10 seconds (750 frames) is displayed.
Basic CD operation by CD-PLAY button
During the TEST mode, the display is turned on and the following buttons become effective.
Operation
1. CD-PLAY: CD operation according to steps
STEP 1: LD ON by pressing CD PLAY button in the stop mode
STEP 2: Focus On by pressing CD PLAY button in STEP 1
STEP 3: CLV servo ON by pressing CD PLAY button in STEP 2
STEP 4: Tracking servo ON by pressing CD PLAY button in STEP 3
STEP 5: Sub-code readout/display by pressing CD PLAY button in STEP 4
* Keep pressing the CD PLAY button for more than 1 second to shift to STEP 5 directly.
2. CD STOP
: To stop the playback operation (shifting from each step to the stop
mode) / To reset display (during display of coefficient)
3. CD SKIP-UP (
)
: Forcible shift in the pickup FWD direction
4. CD SKIP-DOWN (
)
: Forcible shift in the pickup REV direction
Sliding is stopped when the PU_IN switch is turned on.
5. TUNER
: Automatic adjustment (at the present pickup position)
6. POWER
: Canceling the test mode
7. VOLUME UP/DOWN
: To read the coefficient register while the CD operation is stopped/
To display the error number during CD playback
8. CD OPEN/CLOSE
: Normal open/close operation
Readout of the adjusted value
Press the VOL.UP/DOWN button during the stop mode to read the following items.
Press the CD-STOP button to return to the normal display.
Display
Max
Type
Min
_ _ F B : x x
7 F
0 0
8 0
_ _ F G : x x
1 F
0 0
E 0
_ _ T B : x x
7 F
0 0
8 0
_ _ T G : x x
1 F
0 0
E 0
F O F F : x x
7 F
0 0
8 0
T O F F : x x
7 F
0 0
8 0
R F R P : x x
7 F
0 0
8 0
Even if the CD-PLAY button is pressed initially, automatic adjustment is not obtained. Press the TUNER button in
the stop mode to gain CD-PLAY for automatic adjustment. Thereafter press the CD-STOP button to stop automatic
adjustment.
Press the VOL. UP/DOWN button to display automatically adjusted values.
Readout of error numbers
Press the VOL.UP/DOWN button during playback to display the number of errors accumulated for 10 seconds
(750 frames).
Press the CD-STOP button during ERR display to return to the normal TEST mode display.
STEP NO Display
N:NORMAL SPEED
H:HIGH SPEED
TNO Display
Error Display
Time Display
N
H
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
