background image

41

Playback using the external input (EXT. IN) jacks

1

Set the external input
(6CH/8CH EXT. IN) mode.
Press the 6CH/8CH EXT. IN
(on the EXT. IN button on
the remote control unit) to
switch the external input.

6CH / 8CH

EXT. IN

(Main unit)

(Remote control unit)

Once this is selected, the input signals connected to the FL
(front left), FR (front right), C (center), SL (surround left) and
SR (surround right) channels of the EXT. IN jacks are output
directly to the front (left and right), center and surround (left
and right) speaker systems as well as the pre-out jacks
without passing through the surround circuitry.
In addition, the signal input to the SW (subwoofer) jack is
output to the PRE OUT SUBWOOFER jack.

When 6CH/8CH EXT. IN is selected, the input signals
connected to the EL (effect left) and ER (effect right)
jacks are output to the PRE OUT effect (left and right)
jacks.

2

Canceling the external input mode
To cancel the external input (6CH/8CH EXT. IN) setting, press
the INPUT MODE or ANALOG button to switch to the
desired input mode. (See page 37.)

(Main unit)

(Remote control unit)

• When the input mode is set to the external input (6CH/8CH EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, WIDE

SCREEN, 5CH STEREO or DSP SIMULATION) cannot be set.

NOTES:

• In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be

output from channels not connected to the input jacks.

• The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the

video signal is connected, then set this mode.

2 1

HOME THX CINEMA

TUNING

BAND

TITLE

MENU/GUIDE

MODE

DOLBY / DTS

SURROUND

DIRECT

DSP SIMULATION

5CH STEREO

STEREO

INPUT MODE

ANALOG

EXT.IN

MUTING

MASTER VOL.

VOLUME

DISC SKIP+

AVR/AVC

VIDEO

DVD

TV

AUDIO

VDP

VCR

CD

MD

LOCK

DECK

SYSTEM

SETUP

SURROUND

PARAMETER

CH SELECT

SELECT

ENTER

2

1

Lightly press on the bottom of
the door to open it.

EXT.IN

ANALOG

INPUT MODE

ANALOG

INPUT MODE

Summary of Contents for AVR5700 - THX Audio/Video Receiver

































































Reviews: