background image

27

2

3

Press the ENTER button.
The “Auto Preset Memory” screen appears.

Use the CURSOR button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.

ENTER

After completing system setup

1

At the System Setup Menu, press the SYSTEM SETUP button.

2

The changed settings are entered and the on-screen display turns off.

TITLE

SYSTEM

SETUP

This button can be pressed at any time during the system setup process to complete the process.

1

2

3

4

Signals input to the AVR-5700

VIDEO signal input jack (yellow)

E

A

E

A

S-video signal input jack

E

E

A

A

On-screen display signal output

(

A

: Signal  

: No signal)

(

A

: On-screen signals output           

E

: On-screen signals not output)

On-screen display signals

VIDEO MONITOR OUT-1 video

signal output jack (yellow)

A

A

E

E

S-video MONITOR OUT-1 video

signal output jack

A

E

A

A

NOTES:

• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.
• The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is

not connected to the S-video MONITOR OUT-1 video signal output jack.

2

This completes system setup. Once these settings are made, there is no need to change them unless different AV components are   

connected or the speakers are repositioned.

Summary of Contents for AVR5700 - THX Audio/Video Receiver

































































Reviews: