Denon AVR5700 - THX Audio/Video Receiver, Operating Instructions Manual

Page: 16 / 64

16
7 SETTING UP THE SYSTEM
• Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the
various settings described below on the monitor screen using the AVR-5700’s on-screen display function.
These settings are required to set up the listening room’s AV system centered around the AVR-5700.
• Use the following buttons to set up the system:
TUNING
BAND
TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI
RETURN
DVD
SET UP
PANEL
DISPLAY
ON SCREEN
MUTING
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
LOCK
DECK
SYSTEM
SETUP
SURROUND
PARAMETER
CH SELECT
SELECT
ENTER
SYSTEM SETUP button
Press this to display the system setup menu.
SURROUND PARAMETER button
Press this to display the surround parameter menu.
ENTER button
Press this to switch the display on the screen.
Also use this button to complete the setting on the screen.
CURSOR buttons
and : Use these to move the cursors (
0
and
1
) to the left and right
on the screen.
and : Use these to move the cursors (
•
and
ª
) up and down on the
screen.
• System setup items and default values (set upon shipment from the factory)
Default settings
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE for full-
size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
combinations of surround speakers to be used for the
different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
This selects the subwoofer speaker for playing deep bass signals.
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer according to
the listening position.
This adjusts the volume of the signals output from the speakers and
subwoofer for the different channels in order to obtain optimum
effects.
This parameter is for detecting the maximum level of the low bass
signals output from the subwoofer channel in order to protect the
subwoofer from damage and prevent unpleasant distorted sounds
from being produced.
This assigns the digital input jacks for the different input
sources.
This sets whether or not to display the on-screen display that
appears on the monitor screen when the controls on the remote
control unit or main unit are operated (from MONITOR 1 outputs
only).
FM stations are received automatically and stored in the memory.
Front Sp.
Small
DOLBY/
DTS
SURROUND
A
Center Sp.
Small
Surround Sp.
Small
Sub Woofer
Yes
System setup
Speaker
Configuration
(Surround
Speaker
Setting)
Bass Output
Delay Time
Channel
Level
Subwoofer
Peak Limit
Lev
Digital Inputs
On Screen
Display
Auto Tuner
Presets
Q
W
E
R
T
Y
U
I
Surround
mode
Surround
speaker
THX
SURROUND
A
WIDE
SCREEN
A
5CH
STEREO
A
DSP
SIMULA-
TION
A
EXT. IN
A
—
—
—
—
Bass Out = Subwoofer Only THX
Front L & R
3.6 m (12 ft)
Center
3.6 m (12 ft)
Center
0 dB
Surround L & R
3.0 m (10 ft)
Sub Woofer
3.6 m (12 ft)
Subwoofer
0 dB
Front L
0 dB
Front R
0 dB
Surround
L
0 dB
Surround
R
0 dB
Peak Limitter = OFF
Input
source
Digital
Inputs
CD
COAXIAL
1
DVD
COAXIAL
2
VDP
COAXIAL
3
TV/DBS
OPTICAL
1
VCR-1
OPTICAL
2
VCR-2
OPTICAL
3
V. AUX
OPTICAL
4
TAPE-1
OPTICAL
5
On Screen Display = ON
A1 ~ A8
B1 ~B8
C1 ~C8
D1 ~D8
E1 ~E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
NOTES:
• The on-screen display signals are not output from the MONITOR OUT-2 output jack or the color difference (component) video signal (MONITOR OUT) jacks.
• The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV
monitor is connected to both the AVR-5700’s S-Video and video monitor output jacks and signals are input to the AVR-5700 from a video source (VDP, etc.)
connected to both the S-Video and video input jacks, the on-screen display signals are output with priority to the S-Video monitor output. If you wish to output
the signals to the video monitor output jack, do not connect a cord to the S-VIDEO MONITOR OUT jack. (For details, see page 27.)
• The AVR-5700’s on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with
small screens or low resolutions.
• The setup menu is not displayed when headphones are being used.