5. Protection Pass Mode
5.1. Actions
• This mode allows the power to be turned on without activating protections.
• This is the same as normal power-on, except that protections are not activated.
5.2. Operations
Hold down buttons "
CURSOR
0
", "
STATUS
" and "
ZONE3 SOURCE
" at the same time and press the power button to turn
on the power.
The device returns to the normal display after the following is displayed.
FLD
L1
P r o t e c t i o n
P a s s
This is displayed for 5 seconds before returning to the normal display.
6. CX870 / CY920 Reboot Mode
6.1. Actions
• The CX870 / CY920 is restarted after CX870 / CY920 hangup.
• The CX870 / CY920 can be restarted even in the network standby setting.
("
Setup menu
" – "
Network
" – "
IP Control
" – "
Always On
")
6.2. Operations
(1) Select "
Online Music
" as the input source.
(2) Hold down buttons "
DIMMER
" and "
SETUP
" for at least 3 seconds while the power is on.
FL display during CX870 / CY920 reboot
FLD
L1
N e t w o r k
R e s t a r t
(3) Returns to the normal display.
NOTE:
• The CX870 / CY920 Reboot operation is not accepted again for one minute after executing the reboot.
• Reception is prohibited during update, save and load.
75
