Denon AVR-S510BT, Service Manual

Page: 14 / 124

Initializing This Unit
Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the digital PCB.
1. Press the power button (
X
) to turn off the power.
2. Hold down buttons "" and "TUNE +" at the same time and press the power button to turn on the power.
3. Release the buttons after confirming that the display flashes in intervals of approximately 1 second.
The unit is initialized.
[AVR-X520BT / X518CI]
NOTE: • If the status in step 3 does not occur, start again from step 1.
• Initializing the device restores settings configured by the user to the factory settings.
Take note of your settings beforehand and reconfigure them after initialization.
MASTER VOLUME
SOURCE SELECT
SETUP MIC PHONES
5V/1A
GAME CBL/SAT 3 1 DIMMER STATUS
TUNER
PRESET CH
TUNE DVD/Blu-ray 2 Bluetooth 4
QUICK SELECT
TUNE +
X
PRECAUTIONS DURING SERVICE (AVR-X520BT / X518CI)
f
f
14