Denon AVR-1913, Owner'S Manual

Page: 89 / 154

86
Setup ( v page 23 )
Playback (Basic operation) ( v page 30 )
Selecting a listening mode (Sound Mode)
( v page 67 )
n HDMI control function
(
v
page 86 )
n Sleep timer function
(
v
page 87 )
n Quick select function ( v page 88 )
n Web control function ( v page 89 )
n Various memory functions ( v page 90 )
Playback (Advanced operation)
HDMI control function
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
n Operations possible by HDMI control
•
This unit power off can be linked to the TV power off step.
•
You can switch audio output devices with a TV operation.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
•
You can adjust this unit volume in the TV volume adjustment
operation.
•
You can switch this unit input sources through linkage to TV
input switching.
•
When playing the player, this unit input source switches to the
source for that player.
•
If you switch the input source of the unit to “TV AUDIO”, you
can play TV audio with this unit (
v
page 8 “About ARC
(Audio Return Channel) function”).
•
When “HDMI Control” (
v
page 105 ) in the menu is set to
“On”, signals input to the HDMI input connector are output to
the television or other device connected to the HDMI output
connector, even if the power of this unit is in standby (pass-
through function).
• To use this unit to play the audio of a TV that does not support
the ARC function, connect the TV with an optical-digital or analog
connection (
v page 8 ).
• To use the pass-through function, connect an HDMI connection
device that is compatible with HDMI control.
n Setting procedure
1
Set the HDMI output connector corresponding with
the HDMI control function.
Set “HDMI Control” ( v page 105 ) to “On”.
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices
connected by HDMI cable.
• Please consult the operating instructions for the connected devices
to check the settings.
• Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input
connected to this unit.
5
Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6
When you turn the TV’s power to standby, check
that the power of this unit also goes to standby.
If the HDMI control function does not operate properly, check the
following points.
• Is the TV or player compatible with the HDMI control function?
• Is “HDMI Control” (
v
page 105 ) set to “On”?
• Is “Power Off Control” (
v
page 106 ) set to “All” or “Video”?
• Are the HDMI control function settings of all devices correct?
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
v See overleaf
DVD