Denon AVR-1713, Owner'S Manual

Page: 82 / 156

79
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Surr.Parameter
Adjusts surround sound parameters. 84
Tone Adjusts the tonal quality of the sound. 85
Dialogue Level Sets the output level to clarify the dialogue
output from the center channel. 85
Subwoofer Level Sets the subwoofer on/off and its output level. 86
Restorer Expands the low and high frequency components
of compressed audio to enable richer audio
playback. 86
Audio Delay
Compensates for incorrect timing between video
and audio. 86
Volume Set the volume setting. 86
Audyssey Makes Audyssey MultEQ® XT, Audyssey
Dynamic EQ® and Audyssey Dynamic Volume®
settings. 87
Manual EQ Uses the graphic equalizer to adjust the tone of
each speaker. 88
Video
HDMI Setup Makes settings for HDMI video/audio output. 90
Volume Display
Sets where to display the master volume level. 90
Info.Display Displays status of operation temporarily when
the sound mode is changed or input source is
switched. You can set whether or not to show
each of these status displays. 91
Audio Display Sets how long each menu is displayed when the
input source is “NETWORK”, “iPod/USB”, or
“FM”. 91
TV Format Set the video signal format to be output for the
TV you are using. 91
Inputs
Digital Assign Changes input connector assignment. 93
Source Rename
Changes the display name for this source. 94
Hide Source Remove from the display input sources that are
not used. 94
Source Level Adjusts the playback level of the audio input. 94
Input Select Sets the audio input mode and decode mode. 94
Video Source Video of another input source is played back
combined with the playing audio. 95
Setting items Detailed items Description Page
Speakers
Audyssey® Setup
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically. 20
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey®
Setup. 97
Network
Information Display network information. 101
IP Control Set the network function on/off during standby. 101
Friendly Name The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences. 101
Settings
Make settings for wired LAN. 102
General
Language Sets the language for display the menu on the
TV screen. 105
Quick Sel.Names Change the “Quick Select” display title to one
you prefer. 105
Auto Standby When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, “Auto
Standby” is displayed on the display of this unit
and the menu screen. 105
Front Display Adjust the display brightness of this unit. 105
Information
Show information about receiver settings, input
signals, etc. 106
Firmware Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications. 107
Setup Lock Protect settings from inadvertent change. 108
Setup
Assistant
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance. C 7
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD