06.April.06
13/28
COMMAND PARAMETER
function example
TF
UP
TUNER Frequency UP/DOWN , direct change
TFUP<CR>
DOWN
TFDOWN<CR>
****** (6 digits)
--- ****.** kHz at AM band (>050000 is AM.)
****.** MHz at FM band (<050000 is FM.)
TF105000<CR>
(1050.00kHz at AM)
XM*** (3 digits)
--- *** CH at XM band (North America model Only)
TFXM001<CR>
(XM001 CH at XM)
?
Request TF Status
TF?<CR>
TP
UP
TUNER PRESET CH UP/DOWN , direct change to No.**
TPUP<CR>
DOWN
TPDOWN<CR>
**(PRESET
No.)
TPA1<CR>
(PRESET No.”A1”)
?
Request TP Status
TP?<CR>
MEMORY
TUNER PRESET MEMORY
TPMEMORY<CR>
TM
TUNER BAND , MODE Select
AM
---Band set to AM
TMAM<CR>
FM
---Band set to FM
TMFM<CR>
XM
---Band set to XM (North America model Only)
TMXM<CR>
?
Request TM Status
TM?<CR>
AUTO
---Tuning mode set to AUTO mode
TMAUTO<CR>
MANUAL
---Tuning mode set to MANUAL mode
TMMANUAL<CR>
TF, TP, TM
COMMAND
: '*' parameters can NOT operate when INPUT source isn’t TUNER.
