
63
ENGLISH
15
LISTENING TO THE RADIO
1
Press the FUNCTION button and select “TUNER”.
2
Select “FM” or “AM”.
• The selected “FM AUTO”, “FM MONO” or “AM” is
displayed.
• When using the remote control, the mode button is used to
select FM AUTO and MONO.
3
Adjust the receiving frequency.
• When a station is received, the “TUNED” indication will
light.
NOTE:
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
Auto tuning
• When one of the /– button is pressed, the frequency
changes in steps of 50 kHz in the FM band, 9 kHz in the AM
band.
• If one of the /– button is held for over 1 second, the
frequency continues to change when the button is released
(auto tuning) and stops when a station is tuned in.Tuning will not
stop at stations whose reception is poor.
• To stop the auto tuning function, press the /– button
once.
FM Stereo Reception
• When a program being broadcast in “FM AUTO” is received,
the “ST” indicator lights and the program is received in stereo.
• If reception is poor and there is much noise in the stereo signals,
press the BAND or MODE button to set the FM MONO mode.
(1) Tuning
Example: Tuning in FM/AM stations
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M71
TONE / SDB
FUNCTION
MENU / SET
+
-
SURROUND / SELECT
PUSH - PARAM.
1
2
3
FUNCTION
FUNCTION
Main unit
Remote control unit
BAND
RANDOM
BAND
Main unit
Remote control unit
+
-
+
-
A / V
A-B REPEAT
SEARCH MODE
ON
OFF
REPEAT
RANDOM
CLEAR
ZOOM
SLIDE MODE
PROG/DIRECT
MEMO
BAND
MODE
STATUS
FUNCTION
SURROUND
INPUT MODE
TEST TONE
DVD
TUNER
CH
3
-
+
2
1
6
5
4
9
8
7
0
/10
CALL
+10
SYSTEM
MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER
EDIT/MENU
CHARAC.
REC
TIME
TITLE
TUNING /
TV VOL
TV CH
TV CH
TUNER
DVD
MD/LINE-1
TAPE /LINE-2
AUTO DECODE
VIRTUAL
DIRECT
5CH STEREO
STEREO
D.AUX
IN/SURR.
IN/SURR.
DVD
T V
TV IN
SOURCE
9
8
2
1
7
6
+
-
CD SRS
RT
CT
PTY
RDS
2
2
3
1
+
-
+
-
TUNING /
Main unit
Remote control unit
A / V
SYSTEM
MD
CDR TAPE
TUNER TV / VCR
IN/SURR.
IN/SURR.
DVD
Set the remote
control selector
switches to A/V
and TUNER.
PROG/DIRECT
MODE
About the tuning mode and the preset mode
• The function of the “–” and “+” buttons
on the main unit can be switched so that
they can be used for either tuning
(selecting the reception frequency) or for
selecting preset stations.
• The buttons are set to the tuning mode
upon shipment. The mode can be switched
to the preset mode by pressing the “+”
button while pressing in the BAND button.
(When this is done, “PRESET” is flashes for
approximately 5 seconds.)
• Press the “–” button while pressing in the BAND button to
switch to the tuning mode. (When this is done, “TUNING” is
flashes for approximately 5 seconds.)
+
-
Main unit
BAND
Main unit
1ADV-M71E2̲ENG p61-p115 03.12.25 1:08 PM ページ 63