Denon ADV-M71 Operating Instructions Manual Download Page 33

33

ENGLISH

(3) Detailed system setup (changing the system settings)

• The quick system settings and original settings set upon shipment from the factory are changed using the system setting changing menu. The

settings are stored in the memory until they are changed the next time, and remain valid even when the power is turned off.

[1] Speaker settings (type of speaker and whether or not the speaker is connected)

• The output component of the different channels and properties are adjusted automatically according to the combination of speakers actually

used.

1

Press the SETUP button to display the
setup screen.

SETUP

Remote control unit

2

Use the 

and 

ª

cursor buttons to select “SYSTEM SETUP”

under  “<ADVANCED SETUP>”, then press the ENTER
button.

ENTER

Remote control unit

Remote control unit

3

At the system setting changing menu, use the 

0

and 

1

cursor buttons to select the “SPEAKER CONFIGURATION”
tag icon, then press the ENTER button.

3

When the cursor is at a tag icon on the system setting

changing menu screen, the settings screen can also be

selected by pressing the 

ª

cursor button. You can return to

the tag icon by pressing the 

cursor button.

• The speaker settings screen in step 4 appears.

ENTER

Remote control unit

Remote control unit

4

Use the 

ª

0

and 

1

cursor buttons to select whether or

not the various speakers are connected, their size and other

parameters.

Remote control unit

• The item currently being set is displayed in yellow, and the

setting values for other items are displayed in green.

CENTER SPEAKER

FRONT SPEAKERS

SUB WOOFER

SURROUND

SPEAKERS

5

Press the ENTER button to enter the
settings.
• The next screen in the system setting

changing menu appears.

ENTER

Remote control unit

 1ADV-M71E2̲ENG p1-60  03.12.25 1:05 PM  ページ 33

Summary of Contents for ADV-M71





















































































































































































































































































































































Reviews: