8
Get
ting Star
ted
Connections
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Set
tings
Setting items
Setting contents
MultEQ
Corrects
the
frequency
response of the different
speakers.
NOTE
•
“MultEQ” and “Manual
EQ” settings for which
“Not Used” has been set at
“EQ Customize” (
v
page
31) cannot be selected.
• When using headphones,
“MultEQ” is set to “OFF”.
Audyssey :
Optimize frequency response of all speakers.
Audyssey Byp.L/R :
Optimize frequency response of speakers except
front L and R speakers.
Audyssey Flat :
Optimize frequency response of all speakers to flat
response.
Manual :
Apply frequency response set with “Manual EQ” (
v
page 50).
OFF :
“MultEQ” equalization cannot be used.
•
When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is
selected, “
” lights.
•
After running Audyssey Auto Setup, if the Speaker Configuration,
Distance, Channel Level, and Crossover Frequency have changed
without increasing the number of speakers measured, only “
” lights.
• This can also be set by pressing
.
•
When “Audyssey™ Auto Setup” (
v
page 22) procedure is performed, “MultEQ”, “Dynamic EQ”
and “Dynamic Volume” functions are enabled.
• Operating conditions for each function
• Dynamic EQ :
When “MultEQ” is set to “ON”
• Dynamic Volume :
When “Dynamic EQ” is set to “ON”
• Setting :
When “Dynamic Volume” is set to “ON”
NOTE
If the speaker settings are changed after “Audyssey Auto Setup” is performed, “MultEQ”, “Dynamic
EQ” and “Dynamic Volume” functions cannot be selected and “Run Audyssey” is displayed.
If this happens, either perform “Audyssey Auto Setup” again, or perform the “Restore” operation
(
v
page 26) to restore the settings to as they were after “Audyssey Auto Setup” was performed.
MultEQ
Dynamic EQ
Dynamic Volume
Setting
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Adjusting MultEQ®, Dynamic EQ™, Dynamic Volume™
Settings (Audyssey Settings)
Default settings are underlined.
Pla
ybac
k
Setting items
Setting contents
Tone Control
Sets the tone control function
ON and OFF.
This can be set when
“Dynamic EQ” (
v
page
49) is set to “OFF”.
ON :
Allow tone adjustment (treble, bass).
OFF :
Playback without tone adjustment.
The tone cannot be adjusted when in the DIRECT mode.
Bass
Adjusts the low frequencies.
This can be set when
“Tone Control” is set to
“ON”.
–6dB ~ +6dB (0dB)
Treble
Adjusts
the
high
frequencies.
This can be set when
“Tone Control” is set to
“ON”.
–6dB ~ +6dB (0dB)
Adjusting the Tone (Tone Control)
Default settings are underlined.
Summary of Contents for 2310CI - AVR AV Receiver
Page 77: ......
Page 78: ......
Page 79: ......
Page 80: ...D M Holdings Inc Printed in China 5411 10257 006DA www denon com...
