7
Premier SP20005_REV_2
Controls
FOR THE LOCATION OF CONTROLS AND COMPONENTS REF. “MACHINE DESCRIPTION” PAGE 5.
ON / OFF SWITCH (Item 17)
This key switch starts the engine and can be used to stop the engine at anytime during the operation of the machine.
DEADMANS CONTROL (Item 13)
This is an operator presence control. It must be raised before the cylinder or roller can be engaged and held in until the
cylinder or roller is disengaged. Releasing the lever with the cylinder or roller engaged will cause the engine to stop.
BRAKE STEER CONTROLS (Item 14)
To help steer the machine, the rear roller is equipped with independent left and right hand brakes. These are controlled by
the left and right hand levers on the handle bars. Operating the left lever the cause the machine to turn left and similarly
the right lever cause the machine to turn right.
THROTTLE CONTROL (Item 4)
This controls the RPM of the engine and the resultant speed of the machine. Pushing the lever down will increase the
RPM, pulling it back returns the engine to idle.
REAR ROLLER CONTROL (Item 10)
This controls the machines movement. Pushing the lever forwards will engage the friction clutch and cause the machine
to drive. Returning it to the original position will cause the machine to stop.
CYLINDER CONTROL (Item 15)
This controls the cylinder drive. Pushing the lever forwards will engage the friction clutch and cause the cylinder to rotate.
Before the cylinder can be engaged the
“Deadmans”
lever must be held in. Failing to do this will cause the engine to
stop. Returning it to the original position will cause the cylinder to stop.
