CAIR
plus
Safety and User Instructions
PR-2009-0096-GB • Subject to modifications • R8-10/2015
5
2
Safety and User Instructions
The CAIR units are constructed using the state-of-the-art technology and according to
recognized safety regulations. Operation is only allowed if the unit is in perfect working
order given that current operation manual and safety instructions are observed and
potential hazards avoided! Otherwise failure to follow these instructions may result in
death or injury to the user, third persons or damage to the unit, connected units or other
equipment.Have all faults repaired by an authorized specialist without delay!
Consider the safety instructions provided by the manufacturers of individual compo-
nents!
2.1
Availability of the operation manual
This operation manual contains important instructions regarding safe and proper oper-
ation of the unit.
This operation manual applies to installation companies, operators, building techni-
cians, technical personnel or instructed persons as well as electricians.
This manual as well as the safety information of the manufacturer of the individual com-
ponents must always be available at the unit's installation site. When working on the
equipment, observe all instructions and precautions in the current operation manual, in
particular the chapter on safety.
2.2
Scope of the operation manual
This operation manual as well as the instructions of the manufacturer of the individual
components provide you the necessary information on the areas:
– Shipping and storage
– Mounting
– Installation and Electrical Connection
– Commissioning and Maintenance
– Disassembly and Disposal
2.3
Symbols used
The following symbols are used to highlight particular text sections in this operation
manual:
– This symbol is used to indicate normal lists.
•
This symbol indicates instructions to follow.
9
The result of an action is indicated with this symbol.
Danger symbols are specified in section "Labelling of safety instructions" on page 8.
Note!
Additional details on using the unit are specified here.