DENALIELECTRONICS.COM
5. Light Circuit Controls
5.1 -
Controlling the Lights
Our ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets
of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly.
The blue halo controls light set one and the green halo controls light set two.
Light Set One (Blue Halo):
Single Click
ON
--> Press & Hold
OFF
Light Set Two (Green Halo):
Double Click
ON
--> Press & Hold
OFF
Increase Intensity:
Rotate Dial Clockwise
Decrease Intensity:
Rotate Dial Counterclockwise
Switch Between Circuits:
Double Click
6. Fuse Setting Controls
6.1 - Setting The Electronic Fuses
Both light circuits are electronically fused and can be set right from the
switch itself! The halo will illuminate red to notify you when a circuits
fused is tripped.
Enter Fuse Setting Mode:
7 Second hold
Increase Fuse Value:
Rotate Dial Clockwise
Decrease Fuse Value:
Rotate Dial Counterclockwise
Switch Between Circuits:
Double Click
Exit Fuse Setting Mode:
2 Second Hold
6.2 - Recommended Fuse Values
Refer to the list below for the recommended fuse value for a pair of
DENALI light pods.
DM Light Pods
- 4A
D2 Light Pods
- 4A
D3 TriOptic Light Pods
- 10A
D3 Fog Light Pods
- 10A
DR1 Light Pods
- 4A
S4 Light Pods
- 8A
D4 Light Pods
- 10A
D7 Light Pods
- 15A
For other lights not listed above, a good general rule of thumb for
choosing the correct fuse value is to multiply the power draw (Amps) by
1.5 and then rounding up or down to the closest value fuse.
LED Halo Display
Push Button / Dial
Circuit Intensity Level
LED Halo Display
Push Button / Dial
Circuit Fuse Value
Circuit One
Circuit Two
