background image

1443888 Rev B

Page 1

© 2018, CommScope, Inc.

Installation

Instructions

THREE-TIER CABLE CLAMP KIT

(OSP-CLPFEC-LG)

Content

Page

INTRODUCTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1

GENERAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1

One Cable Per Entry Port With Possible Future Cable Addition (Figure 2A)  . . . . . 4

2.2

Two Cables Per Entry Port (Figure 2B). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3

Three Cables Per Entry Port (Figure 2C)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3

CUSTOMER INFORMATION AND ASSISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

INTRODUCTION

These instructions provide procedures for installing cable clamps in a stacked

 

(Three Tier) arrangement. Up to three cable clamps can be assembled together for 

securing up to three cables in a Fiber Entrance Cabinet (FEC). 

Revision History

ISSUE

DATE

REASON FOR CHANGE

1

05/1997

Original.

1

05/1999

Updated to current format (1999).

1

06/2008

Updated to current format (2007).

Rev B

April 2018

Updated to CommScope format and contact info updated.

Related Publications

Listed below are related manuals and their publication numbers. Publications can be 

downloaded from the CommScope web site at 

http://www.commscope.com/SupportCenter

Title/Description

ADCP Number

Fiber Entrance Cabinet (FEC) User Manual

93-031

Trademark Information

CommScope (logo) and Commscope are trademarks.

ADCP-93-080 

 Rev B 

 April 2018

Summary of Contents for OSP-CLPFEC-LG







Reviews: