3. Aiming The Lights
3.1 - Suggested Aiming Method
Step One:
With someone sitting on the bike and holding it upright on
level ground, position the vehicle 25 feet from a flat and vertical wall.
Be sure the wall is large enough that both beams can be projected onto
the wall. A garage door is a great place to perform this procedure.
Step Two:
Measure the distance from the ground to the center of the
light pods (H)
Step Three:
Using tape, make a horizontal line that is 2 inches lower
than the previous measurement from the ground to the center of the
lights (H-2”).
Step Four:
Loosen the mounting and hinge bolts then aim each light so
that the center of the hot spot aligns with the tape line on the wall. The
lights should be aimed equidistant left and right from center line of the
vehicle.
Step Five:
Once final adjustments are made to the lights, tighten the
mounting and hinge bolts.
Congratulations! The DENALI LED Light Kit has been successfully
installed! Enjoy!
(25 FEET FROM WALL)
(H-2”)
(H)
(H)
If you have limited space or are having trouble identifying the hot spot on the wall, you can shorten the distance to 6 feet and mark the tape line at H-1/2".
