1. Assembling The Display
1.1 - Applying The Decals
Step One:
Prepare the top surface of the sheet metal base (a) using
rubbing alcohol. Allow to dry completely.
Note:
The decals (o) should be applied from left to right in the following
order: B6, SoundBomb, D2, D4
Step Two:
Peel and remove the backing from the decal (o)
Step Three:
Beginning with one edge, apply the decal (o) to the sheet
metal base (a), slowly working your way across the surface to push out
any air bubbles.
DENALIELECTRONICS.COM
1.2 - Mounting The Product & Switches
Step One:
Use a razor blade to cut out only the mounting holes highlighted
yellow from the decals.
Step Two:
Attach the B6 mounting bracket (k) to the display base (a)
using the supplied bolt (h) and nut (i).
Step Three:
Attach the B6 Brake Light (NOT INCLUDED) to the B6
mounting bracket (k) using the supplied M4 screws (l).
Step Four:
Insert the push button switch (g) in the switch hole on the
bottom left of the display base (a).
Cut Out From Decal
(o)
(a)
1.3 - Mounting Continued
Step Five:
Attach the horn mounting bracket (j) to the display base (a)
using the supplied bolt (h) and nut (i).
Step Six:
Attach the SoundBomb Horn (NOT INCLUDED) to the horn
mounting bracket (j) using the hardware that came with the horn.
Step Seven:
Use a 13mm wrench to attach the light pods (NOT
INCLUDED) to the display base (a).
Step Eight:
Disconnect the switch from the wiring harness (b).
Step Nine:
Use a screw driver and the included self tapping screws (c) to
secure the switch to the display base (a).
1.4 - Installing The Backdrop Sign
Step One:
Prepare the back face of the sheet metal base (a) using
rubbing alcohol. Allow to dry completely.
Step Two:
Apply an adhesive square (q) to each corner of the back face of
the display.
Step Three:
Press the backdrop sign (p) against the adhesive squares (q)
with firm pressure to adhere the sign to the display.
(l)
(h)
(k)
(g)
(h)
(j)
(q)
(p)
