COPYRIGHT © DENAFRIPS
COPYRIGHT © VINSHINE AUDIO
3
3.
INSTALLATION AND SETUP
The Ares II is easy to use. Nonetheless, please read this section to fully understand the
functions and features available.
Figure 1.
Ares II Front Panel
Description:
(1)
Standby Button
Press the button once to switch on the DAC, vice versa, press once to switch the DAC into
standby mode.
(2)
Standby LED
The Standby LED shall be on when the DAC is in Standby Mode. The LED shall be dimmed
when the DAC is in Operating Mode.
(3)
Input Selection: USB
Press the button to select USB as current input source. The respective LED shall be on.
(4)
Input Selection: COAXIAL 1
Press the button to select COAXIAL 1 as current input source. The respective LED shall be on.
(5)
Input Selection: COAXIAL 2
Press the button to select COAXIAL 2 as current input source. The respective LED shall be on.
(6)
Input Selection: OPTICAL 1
Press the button to select OPTICAL 1 as current input source. The respective LED shall be on.
(7)
Input Selection: OPTICAL 2
Press the button to select OPTICAL 2 as current input source. The respective LED shall be on.
(8)
Phase Button
Press the button to toggle Phase Output. Phase LED On: Negative Phase, Phase LED Off:
Positive Phase
1
2
3 4 5 6 7 8 9
1
10
